Espesímetro PCE-CT 26FN
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
The following information shall be provided:
For iron and non-ferrous substrates / Large measurement range /
Rotating colour screen / Light weight
For iron and non-ferrous substrates / Large measurement range /
Rotating colour screen / Light weight
The PCE-CT 26FN thickness is a non-destructive measurement of the coating thickness (laces, paints, plasticizers, etc.) on ferrous and non-ferrous metals. The thickness meter is ideal for detecting
The PCE-CT 26N has been designed to measure the thickness of non-magnetic coatings (such as lacquer, plasticized, chromium, copper, zinc, anodized, etc.) on iron and steel bases. It also measures the thick
Application and use
Simply place the thickness on the measuring material and read the value on the screen. This simple way you can measure the thickness or coating of lacquer, paints, plasticizers, chromium, copper, zinc, galvanized, enamel on steel,
The calibration standards included in the shipping content allow you to adjust the thickness at any time. For this, place a calibration standard on a plate (Fe or NFe) and place the thickness over the calibration standard.
The PCE-CT 26N has been designed to measure the thickness of non-magnetic coatings (such as lacquer, plasticized, chromium, copper, zinc, anodized, etc.) on iron and steel bases. It also measures the thick
Application and use
Simply place the thickness on the measuring material and read the value on the screen. This simple way you can measure the thickness or coating of lacquer, paints, plasticizers, chromium, copper, zinc, galvanized, enamel on steel,
The calibration standards included in the shipping content allow you to adjust the thickness at any time. For this, place a calibration standard on a plate (Fe or NFe) and place the thickness over the calibration standard.
- Immediate measurement
- Wear resistant sensor
- Crack in V for measuring in tubes
- I drive with one hand
- Optional ISO calibration
- Includes transport case
- Wear resistant sensor
- Crack in V for measuring in tubes
- I drive with one hand
- Optional ISO calibration
- Includes transport case
| Technical specifications | |
| Measurement range | 0 ... 1250 μm (0 ... 50 thousands) |
| Resolution adopted by the Council | 1 μm (0,1 mils) |
| Accuracy | ±(3 % + 2 μm) or ±(3 % + 0,1 mils) |
| Minimum measuring area | 5 x 5 mm |
| Radius of curvature minimum | Convex: 3 mm / concave: 50 mm |
| Minimum thickness of the substrate | Fe: 0.5 mm |
| NFe: 0,3 mm | |
| Screen | Other electrical equipment |
| Environmental conditions | The following conditions shall apply: |
| Food | 2 x 1.5 V batteries, of a kind AAA |
| Dimension | 100 x 52 x 29 mm |
| Weight | Approximately 68 g (without batteries) |
