Durómetro PCE-DDA 10-ICA incl. certificado de calibración ISO

Code / Model:
Manufacturer: PCE Instruments
Department:
Category of products:
Sub-category: Instruments and equipment
You've seen it before.: 1

Description of the product

Digital hardness gauge for measuring soft rubber, rubber and
Elastomers in general, with USB interface and software

The durometer for measuring rubber hardness (Shore A) is used both as a handheld device for measuring on-site and for checking material in the laboratory. The durometer has a measuring component with a measuring head and a digital display with a reading accuracy

- Pocket size
- Warning of low battery capacity
- Measurement range 0 ... 100 Shore A
- Suitable for individual and series measurements
- For measuring rubber
- Possibility of data transfer to a PC

Technical specifications
Measurement range	0 ... 100 shore A
Accuracy measurement	< ± 1 degree of hardness
Resolution adopted by the Council	0,1 degree of hardness
Type of measurement	Load of spring
The diameter of the spring support of the penetrating body	1,25 ± 0,1 mm
The maximum diameter of the penetration body	0,79 ± 0,03 mm
Angle of conicity	The following shall be added:
Memory capacity	500 measurements
Units	Degree of hardness
Range of ambient temperature	0 ... +50 °C
Environmental humidity range	20... 85% of the time
Size	153 x 50 x 29 mm (main part of instrument)
Weight	Other, of a kind used for the manufacture of goods
Food	The manufacturer shall ensure that the vehicle is equipped with a high-speed automatic transmission.
Maximum operating time	20 h approx. with a battery charge
Loading time	Three hours or so.
Compliance with the rules	The following information is provided by the manufacturer: