Comprobador de superficies PCE-CRC 10

Code / Model:
Manufacturer: PCE Instruments
Department:
Category of products:
Sub-category: Instruments and equipment
You've seen it before.: 1

Description of the product

Surface checker to check the adhesion of coatings /
Ideal for thin, thick and hard coatings / With large, slip-resistant handle / Interchangeable blades / With a moving head / Robust and comfortable design

The surface checker has been designed to check the quality of adhesion of coatings. The surface checker can be used on any type of surface with fine, thick or hard coatings. The adhesion of lacquer and other coatings is a production and quality feature that determines its

- Verification of adherence
- For fine, thick and hard coatings
- Slip-resistant mango
- Selection of the type of blade
- Interchangeable blades
- Moving head
- Very robust and comfortable design
- Includes transport case

Measurement range	For thicknesses of up to 60 μm
Number of teeth	6 or 11 (depending on model)
Distance from the cut	1 ... 3 mm (depending on model)
Selection of the appropriate cross-sectional cutting method
- Method A (cutting in X): for thickness tests according to ASTM D 3359 Other, of a width of > 125 μm - Method B (cross-cutting): for tests according to ISO 2409 a thickness of between 0 and 250 μm and an ASTM D 3359 thickness of < 125 μm
Selection of the appropriate cutting distance (for method B)
The following information is provided by the manufacturer:
Other, of a thickness of not more than 10 mm	Type of substrate	Distance between teeth
0 ... 60 μm	Hard	1 mm
0 ... 60 μm	Soft	2 mm
more than 60 ... 120 μm	Hard or soft	2 mm
of a width of not more than 120 ... 250 μm	Hard or soft	3 mm
The following conditions shall apply:
Other, of a thickness of not more than 10 mm	Distance between teeth
0 ... 50 μm	1 mm
50 ... 125 μm	2 mm