Calibrador de termoelementos PCE-TTC 30
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
In addition to introducing a temperature or voltage value up to 250 mV, the thermoelectric calibrator can also be used in ramp mode. The user can decide whether to use the ramp in continuous mode or at defined intervals.
- The accumulator
- For thermometers E, J, K, T, B, R, S, N, mV
- 24 V power supply for loop
- Compatible with HART
- Manual mode and ramp function
- Continuity test
- Data recording function
|
The following shall be added: |
|||
|
Rate |
0 ... 30 V |
||
|
Resolution adopted by the Council |
0,001 V |
||
|
Accuracy |
±0,02 % of the value + 2 dgt. |
||
|
|
|||
|
Other electrical equipment |
|||
|
Rate |
0 ... 24 mA |
||
|
Resolution adopted by the Council |
0,001 mA |
||
|
Accuracy |
±0,02 % of the value + 2 dgt. |
||
|
|
|||
|
Other heat-treating |
|||
|
The guy |
Rate |
Resolution adopted by the Council |
Accuracy |
|
And then |
-200 to 1200 °C |
The following conditions shall apply: |
The following conditions shall apply: |
|
J |
-200 to 1200 °C |
The following conditions shall apply: |
The following conditions shall apply: |
|
K |
-200 ... 1372 °C |
The following conditions shall apply: |
The following conditions shall apply: |
|
T |
-200 ... 400 °C |
The following conditions shall apply: |
The following conditions shall apply: |
|
B. Other |
450 to 1800 degrees |
The following conditions shall apply: |
The following conditions shall apply: |
|
R |
0 ... 1750 °C |
The following conditions shall apply: |
The following conditions shall apply: |
|
S |
0 ... 1750 °C |
The following conditions shall apply: |
The following conditions shall apply: |
|
N |
-200 to 1300 °C |
The following conditions shall apply: |
The following conditions shall apply: |
|
mV |
-10 ... 80 mV |
0,001 mV |
± 0,02 % of the value + 2μV |
|
-10 ... 250 mV |
0,01 mV |
± 0,02 % value + 0,02 mV | |
|
|
|||
|
Note:These indications correspond to the ITS-90 temperature standard. |
|||
|
|
|||
|
Other specifications |
|||
|
Screen modes |
Measurement: mA/mV/V/thermoelectrical |
||
|
Heat and air |
The following is the list of the following: |
||
|
Error of cold joint compensation |
Other, of a kind used for the manufacture of goods |
||
|
Maximum input voltage |
30 V DC |
||
|
The temperature coefficient |
Other, of a thickness of < 30 ppm |
||
|
Impedance of entry |
The heat element / mV / V: > 1 MΩ |
||
|
Response time |
Other, of a kind used for the manufacture of goods |
||
|
Impedance |
> 4,7 kΩ with thermoelectric power / mV |
||
|
Frequency of display updates |
10 Hz |
||
|
Isolation |
Other, of a kind used for the manufacture of goods |
||
|
Data recording |
Internal memory, 150000 values |
||
|
Interface |
Other electrical equipment |
||
|
Screen |
TFT LCD 2,4" / 240 x 320 pixels / Background lighting |
||
|
The output voltage of the loop shall be: |
The following conditions shall apply: |
||
|
The following shall be added to the list of the following: |
250 Ω ± 20% |
||
|
Special functions |
Passage and ramp function |
||
|
Continuity test |
Adjustment of the limit value up to 100 Ω |
||
|
Food |
Li-Ion battery with a capacity of 3,7 V / 2300 mAh |
||
|
Duration of load |
About five hours. |
||
|
Source of power |
Input: 100 ... 240 V AC / 50 / 60 Hz |
||
|
Operating time of the accumulator |
Approximately 18 h: Simulation and measurement mode with low LCD lighting |
||
|
Dimension |
Other, of a width of not more than 600 mm |
||
|
Weight |
Approximately 300 g |
||
|
Degree of protection |
The following information is provided: |
||
|
Operating conditions |
Accumulator: 0 ... +55 °C / 30 ... 90 % H.r. |
||
|
Storage conditions |
-20 ... +60 °C / 30 ... 90% H.r. without condensation |
||
|
Warming time |
About 15 minutes. |
||
