Modelo

LR-W500

Tipo

2 m (6.6') Cable Type

Distance of Detection

30 to 500 mm (1.18" to 19.69")

Minimum Point Diameter

Adjustable Point

• Approx. ø3.5 mm to 100 mm (ø0.14" to 3.94")
• Approx. ø9 mm to 250 mm (ø0.35" to 9.84")
• Approx. ø18 mm to 500 mm (ø0.71" to 19.69")

Response Time

200 µs/1 ms/10 ms/100 ms/500 ms selectable *1

Light Source

White LED

Mutual Interference Reduction Function

Up to 2 units when alternating frequencies are set

Timer

OFF/ON Delay/OFF Delay/One Shot

Power Supply

Voltage Supply

10 to 30 VCD, including 10% ripple (P-P), Class 2 or LPS

Current Consumption

65 mA or less (no load) at 24 VCD; 120 mA or less (no load) at 12 VCD *2

I/O

Control Output

Selectable NPN/PNP open collector, 30 VCD or less, 50 mA or less, remaining voltage: 2 V or less, N.A./N.C. selectable *3

External Input

Selectable laser emission ON/OFF adjustment, Short-circuit current: 1 mA or less for NPN/2 mA or less for PNP. For the applied voltage, refer to the connection diagrams in the instruction manual. For input times, refer to the timing table in the instruction manual. *3

Protection Circuit

Protection against reverse power connection, power surges, output overcurrent, output surges, and reverse output connection

Environmental Resistance

Degree of Protection

IP65/IP67 (IEC60529)

Ambient Light

Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less

Ambient Temperature

-20 to +50 °C (-4 to 122 °F) (No freezing)

Relative Humidity

35 to 85% HR (No condensation)

Vibration Resistance

10 to 55 Hz, Double amplitude 1.5 mm (0.06"), 2 hours in each of the X, Y, and Z directions

Shock Resistance

1,000 m/s², 6 times in each of the X, Y, and Z directions

Material

• Housing: Zinc die-cast (nickel-plated chrome)
• Indicator Cover: PPSU
• Buttons: PES
• Lens and Screen Cover: PMMA (scratch-resistant coating)
• Cable Bush: PBT
• Cable: PVC
• Point Adjustment Dial: Iron (tetraoxide iron coated)

Weight

Approx. 170 g (including cable) *1

Notes

• *1 When alternating frequencies are set, the response time increases by approx. 20%.
• *2 195 mA or less (at 10 V, with load)
• *3 IO-Link: Compatible with Specification v.1.1/COM2 (38.4 kbps). The installation file can be downloaded from the KEYENCE website (http://www.keyence.com). If you are using the product in an environment where files cannot be downloaded via the internet, please contact your nearest KEYENCE office.