Amperímetro PCE-830-2-ICA incl. certificado ISO
- Code / Model:
- Manufacturer: PCE Instruments
- Department: Test and measurement
- Category of products: Multi-meters and accessories
- Sub-category: - What ?
- You've seen it before.: 1
3 phase amplifier, energy meter and harmonics analyser
with memory, PC port and software
with memory, PC port and software
The power and harmonics analyzer (Power and Harmonics Analyzer) is used to measure one to three phases of electrical magnitudes in the alternating current network. In addition to detecting "normal" measurement magnitudes such as voltage, current, frequency, power and energy,
- Network analysis of 3 phases/4 conductors, 3 phases/3 conductors, 1 phase/2 conductors, 1 phase/3 conductors
- Measurement of the actual actual value (V 123 and I 123)
- Measurement of active power (W, KW, MW, GW)
- Measurement of apparent and reactive power (KVA, KVAR)
- Power factor (PF), phase angle (Φ)
- Measurement of energy and labour (Wh, KWh, KVARh, PFh)
- Measurements of current from 0.1 mA to 3000 A, for example to analyse the need for power reserve in a factory
- Large LCD display displaying up to 35 parameters simultaneously (3P4W [=3 phases/4 conductors])
- Programmable CT (1 to 600) and PT (1 to 3000) conditions
- Indication of the overlapping current and voltage waveforms
- 512 KB memory with programmable recording intervals (measurement rate from 2 to 3000 seconds, 17,470 values in 3 phases / 4 drivers)
- Indication of waveforms, performance parameters and harmonic distortions
- Large LCD display with illuminated dot array
- Average power (AD in W, KW, MW)
- Maximum power (MD in W, KW, MW) with the programmed period
- Analysis of harmonic distortions up to a curvature of 99
- Screen indication up to the 50th harmonic waveform
- Indication of the waveform with maximum value (1024 measurement values/periods)
- Analysis of absolute distortions (%THD-F)
- Graphical balance diagram with parameters of the 3-phase system
- Detects up to 28 transients (time and cycles) with the programmable threshold (%)
- Three-phase asymmetric current or voltage ratio (VUR)
- 3 phase stress or asymmetric current factor (d0%, d2%)
- Optically insulated USB port
- Timer and integrated timetable for data recording
- Maximum diameter of the electrical conductor for the amperage pin:
The following is the list of the types of vehicles that are included in the list:
- Measurement of the actual actual value (V 123 and I 123)
- Measurement of active power (W, KW, MW, GW)
- Measurement of apparent and reactive power (KVA, KVAR)
- Power factor (PF), phase angle (Φ)
- Measurement of energy and labour (Wh, KWh, KVARh, PFh)
- Measurements of current from 0.1 mA to 3000 A, for example to analyse the need for power reserve in a factory
- Large LCD display displaying up to 35 parameters simultaneously (3P4W [=3 phases/4 conductors])
- Programmable CT (1 to 600) and PT (1 to 3000) conditions
- Indication of the overlapping current and voltage waveforms
- 512 KB memory with programmable recording intervals (measurement rate from 2 to 3000 seconds, 17,470 values in 3 phases / 4 drivers)
- Indication of waveforms, performance parameters and harmonic distortions
- Large LCD display with illuminated dot array
- Average power (AD in W, KW, MW)
- Maximum power (MD in W, KW, MW) with the programmed period
- Analysis of harmonic distortions up to a curvature of 99
- Screen indication up to the 50th harmonic waveform
- Indication of the waveform with maximum value (1024 measurement values/periods)
- Analysis of absolute distortions (%THD-F)
- Graphical balance diagram with parameters of the 3-phase system
- Detects up to 28 transients (time and cycles) with the programmable threshold (%)
- Three-phase asymmetric current or voltage ratio (VUR)
- 3 phase stress or asymmetric current factor (d0%, d2%)
- Optically insulated USB port
- Timer and integrated timetable for data recording
- Maximum diameter of the electrical conductor for the amperage pin:
The following is the list of the types of vehicles that are included in the list:
| Measurement values | Measurement / resolution / precision ranges |
| The following table shows the results of the calculation of the risk weight of the product: Other(Figure 1 is replaced by the following: | The following conditions shall apply: The following conditions shall apply: The following conditions shall apply: The following conditions shall apply: The following conditions shall apply: The power consumption of the product shall be calculated on the basis of the following data: |
| The following table shows the results of the calculation of the risk weight of the product: AC current The following information is provided for the purpose of this Regulation: | The following conditions shall apply: The following is the list of the following: The following is the list of the following: |
| Air conditioning(Table 1 of this annex) | The value of the underlying load shall be the sum of the following: (phase against take-off) The value of the underlying load shall be the sum of the following: (phase against phase) |
| Harmonic distortions of AC voltage | 1 ... 20o / 0.1% / ±1.0% 21 ... 49o / 0,1 % / 4 % of the measurement value ±2,0 % 50 ... 99o / 0,1 % / 6 % of the measurement value ±2,0% |
| The following table shows the results of the calculation of the risk weight of the product: Other, of a kind used for the manufacture of goodsof AC current in % | 1 ... 10o / 0.1% / ±2 % 21 ... 49o / 0,1 % / 4 % of the measurement value ±2,0 % 50 ... 99o / 0,1 % / 6 % of the measurement value ±2,0% |
| The following table shows the results of the calculation of the risk weight of the product: The following table shows the results of the calculation of the risk weight of the product: Power factor(PF) | The value of the underlying assets shall be reported in the following column: |
| The following table shows the results of the calculation of the risk weight of the product: The following table shows the results of the calculation of the risk weight of the product: The following shall be added to the list:(Phi) | - 180° ... 180° / 0.1° / ±1° |
| The following table shows the results of the calculation of the risk weight of the product: Total harmonic distortion | 0,0 ... 20,0 % / 0,1 % / ± 2 % The measurement value shall be expressed as a percentage of the total measurement value of the measuring instrument. 100 ... 999,9 % / 0,1 % / ±10 % of the measurement value ±1 % |
| Maximum measurementin AC voltage and current | The following is the list of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of The following is the list of the parameters used in the calculation of the power consumption: |
| Measurement of crest value in AC voltage and current | The value of the underlying assets shall be reported in the following column: |
| Frequency rangein automatic mode | The following is the list of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of the values of |
| Memory | 512 kB (non-volatile memory) for a maximum of 52,420 measuring values by 1 phase/2 conductor measurement |
| Port | USB (optically insulated) |
| Software and data cable | Both in the content of the shipment, suitable for Windows 2000, XP, ME |
| Screen | Lighted display, point array LCD |
| Food | 8 x 1,5 V type AA (Mignon) |
| Dimension | 257 x 155 x 57 mm |
| Weight | Other, of a kind used for the manufacture of goods |
| Environmental conditions | Max. 85 % H.r. / -10 ... +50 oC |
| Type of protection / regulations | The following information is provided by the Commission: |
| The following table shows the results of the calculation of the calculation of the weight of the product: - Electrical conductor capture: 55 mm diameter - Selection of range: manual (10A, 100A, 1000A) - Dimensions: 244 x 97 x 46 mm - Weight: 600 g | |
