Amperímetro-Indicador PCE-N24S
- Code / Model:
- Manufacturer: PCE Instruments
- Department: Test and measurement
- Category of products: Manufacture from materials of any heading
- Sub-category: - What ?
- You've seen it before.: 1
4 digit panel perimeter with a height of 20 mm / IP 65 on the front /
the sensor power / for standardised signals 4 ... 20 mA /
configuration through the software
the sensor power / for standardised signals 4 ... 20 mA /
configuration through the software
The panel amp is used to assess the signal of the most common process 4...20 mA. With the panel amp it is possible to configure the input signal freely, allowing it to be used in a very varied way. The current value of the panel display can be read easily thanks toThe settings made through the software in the panel amp can be recorded and retrieved.
- IP 65 protection on the front
- For process signals of 4-20 mA
- Screw connection
- Powering the sensor
- Configuration through the software
- Process indicator with LED display
- For process signals of 4-20 mA
- Screw connection
- Powering the sensor
- Configuration through the software
- Process indicator with LED display
| Entry | The following is the list of the Member States of the European Union: |
| Accuracy | ± (0,2% FS + 1 digits) |
| The following is the list of the components used: | 10 Ω ± 1 % |
| Scale | 2 points |
| Screen | 4 digit LED with 7 segments, height: 20 mm |
| Indication range | -9999 ... 99999 |
| Powering the sensor | 24 V DC, not more than 30 mA |
| Environmental temperature | Operating: -10 to 55 oC Stored: -25 to +85 oC |
| Dimension | 96 x 48 x 64 mm |
| Dimensions for panel installation | 92 x 45 mm (according to the DIN) |
| Power supply voltage | The following conditions shall apply: 20 ... 40 V AC/DC |
| Type of protection | Frontal: IP 65 |
| Weight | Approximately 200 g |
| Assembly | Other, of a kind used for the manufacture of goods of heading 8106 |
| Carcass | Other, of a kind used for the manufacture of goods |
