Acelerómetro PCE-VS11
- Code / Model:
- Manufacturer: PCE Instruments
- Department: Test and measurement
- Category of products: Measurement of speed
- Sub-category: Machinery for the manufacture of electrical equipment
- You've seen it before.: 1
The speedometer is the PCE-VS1x series
Piezoelectric accelerometer / Aluminum rugged case / Fitting by threaded connection M8 / Teach-In function /
Water resistant according to IP 67
Piezoelectric accelerometer / Aluminum rugged case / Fitting by threaded connection M8 / Teach-In function /
Water resistant according to IP 67
The PCE-VS1x series vibration switch is used to control the acceleration and speed of vibrations. This type of vibration switch is used in different measuring applications. Some fields of use of the vibration switch are for example predictive maintenance of motors, fans, pumps and compr
The different fields of application where you can use this vibration switch shows the versatility of this measuring instrument. For example, you can use this vibration switch as an emergency stop on production lines, where a strong vibration could cause damage to equipment or personnel. You can also use this vibration switch
The different fields of application where you can use this vibration switch shows the versatility of this measuring instrument. For example, you can use this vibration switch as an emergency stop on production lines, where a strong vibration could cause damage to equipment or personnel. You can also use this vibration switch
- 60 frequency ranges
- Piezoelectric accelerometer
- Water resistant to IP67
- The "Teach-In" function
- A sturdy aluminium case
- Simple assembly by threaded connection M8
- Piezoelectric accelerometer
- Water resistant to IP67
- The "Teach-In" function
- A sturdy aluminium case
- Simple assembly by threaded connection M8
| Technical specifications | |
| The following information shall be provided: | |
| Control of effective value and peak value | Yes, I did. |
| Control in the frequency range | Yes, I did. |
| LEDs for warning purposes and alarms | Green / red |
| Other USB connections | No , it 's not . |
| Measurement range | Acceleration: 0,1 ... 1000 m/s2 Speed: according to frequency |
| Filter for effective value and peak value of the acceleration | High frequency filter: 0.1 / 2 / 5 / 10 / 20 / 50 / 100 / 200 / 500 / 1000 Hz; Low frequency filter: 0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 kHz |
| Filter for effective value and peak value of the speed | High frequency filter: 2 / 5 / 10 / 20 / 50 Hz; Low frequency filter: 1 kHz |
| FFT frequency range and resolution | 2 ... 1000 or 20 ... 10 000 Hz; 360 lines |
| Limit of FFT | 10 adjustable frequency intervals with limiting magnitude |
| Relay exit | The photoMOS relay The following conditions shall apply: Programmable opening and closing |
| Teach-In function | The following table shows the number of units of the vehicle: |
| Relay connection | The following is the list of the following: |
| Delayed alarm The alarm continuity | 0 ... 99 seconds 0 ... 9 seconds |
| Interface | USB 2.0 Full Speed for setting and measuring parameters The following information is provided by the Commission: |
| USB connection | Other electrical connectors |
| Software | The following information shall be provided: Example of Labview programming |
| Food | Other electrical equipment 5 ... 30 V DC; < 100 mA |
| Degree of protection | Other, not further worked than cutting |
| Operating temperature | -40 ... +80 °C |
| Dimension (Ø x height) | 50 x 52 mm |
| Assembly | The following conditions shall apply: The following conditions shall apply: |
| Weight | Other, of a kind used for the manufacture of goods |
