SENSOR DE VIBRACION PCH 1106 MK2 CHF 8737
If you would like a quote for this product, please click the following button.
REQUEST QUOTESPCH 1026 CHF 8784
Usage:
PCH 1106 Mk2 is designed for permanent monitoring
of unbalance and misalignment problems on
rotating machinery. The sensor measures in mm/s,
m/s² or mm, rms or Pk-Pk, and gives an output in
both mA and voltage relative to full scale (FS).
Some PCH 1106 Mk2 versions measure 0-100 °C or
deliver RAW output as well. The sensor is sensitive
parallel to the length axis.
Mounting:
The PCH 1106 Mk2 is mounted on the surface by
the integrated M8 stud at the bottom of the sensor.
1) Prepare a flat surface of min Ø28 using a top
moulder, which fits in an electrical drill (CHO
1102).
2) Drill and tap a M8x1.25 thread in the centre of
the flat surface. The depth should be min 10
mm (CHO 1103).
3) Use a coupling agent such as Loctite 242/243
or 270 to lock the stud for permanent installation.
4) Tighten the sensor directly to the surface using
3-6 Nm mounting torque.