GT2-A32

System of detection: Quartz crystal scale, CMOS image sensor projection system, absolute type (no pull errors)

Measuring range

32 mm / 1.26"

Resolution

0.5 μm / 0.02 Mil

Indicated accuracy

3 µm / 0.12 Mil (p-p) *1

Measuring force

• Mounting downwards: 2.1 N *2
• Lateral mounting: 1.8 N *2
• Mounting upwards: 1.5 N *2

Sampling cycle

1 ms

Operation indicator light

2-color LED (red, green)

Environmental resistance

• Protection rating: IP67 *3
• Pressure resistance: 1 MPa
• Applied pressure range: 0.25 to 0.5 MPa
• Ambient temperature: 0 to +55 °C / 32 to 131 °F (without freezing)
• Relative humidity: 35 to 85 % HR (without condensation)
• Vibration resistance: 10 to 55 Hz, Double amplitude 1.5 mm / 0.06", 2 hours in each of the X, Y and Z directions *4

Materials

• Main housing: Zinc die-cast cover, Aluminum alloy cylinder
• Air coupling sleeve (resin part): Polyacetal
• Air coupling sleeve (metal part): Brass and nickel sheet
• Indicator: Polyarylate
• Dust cover: NBR
• Contact: Stainless steel type 304, 440C *5

Cable for head

Optional (M8 connector)

Weight

Approx. 340 g (excluding cable) *1

*1 Value when the ambient temperature is 20 °C / 68 °F.

*2 Value at the center of the measuring range. Please note that the measuring force changes depending on the installation status of the dust covers.

*3 Ensure that the pneumatic tube is connected to the exhaust joint and that no foreign objects enter the inside of the joint.

*4 If a D mounting hardware is used with the GT2-A32 and GT2-A50, the double amplitude becomes 0.75 mm / 0.03".

*5 The contact is included with the sensor.