Model Specifications

Distance Reference: 150 mm (5.91")

Measurement Distance: 100 to 200 mm (3.94" to 7.87")

Detection Area:

• Scanning Mode:
• Measurement Distance of 100 mm (3.94"):
56.5 × 42.0 mm (2.22" × 1.65") (min.)
• Measurement Distance of 150 mm (5.91"):
82.5 × 61.5 mm (3.25" × 2.42") (min.)
• Measurement Distance of 200 mm (7.87"):
108.5 × 81.0 mm (4.27" × 3.19") (Direction X) × (Direction Y)
• Line Mode:
• Measurement Distance of 100 mm (3.94"):
56.5 mm (2.22") (min.)
• Measurement Distance of 150 mm (5.91"):
82.5 mm (3.25") (min.)
• Measurement Distance of 200 mm (7.87"):
108.5 mm (4.27") (Direction X)

Laser Source

Laser Type: Semiconductor red laser with a wavelength of 660 nm (visible light)

Laser Class: Class II Laser Product (FDA [CDRH] Part 1040.10), Class 2 Laser Product (IEC 60825-1: 2014)

Output: 0.95 mW (FDA (CDRH) Part 1040.10), 1.6 mW (IEC 60825-1: 2014)

Performance

Minimum Detectable Object Size:

• Scanning Mode: ø1.7 mm (ø0.07") *2
• Line Mode: 1.7 mm × 1.7 mm (0.07" × 0.07") *2

Repeatability: 50 µm *3

Estimated Detection:

(Estimated detection: When measuring the height between two points, the minimum step difference is as follows.

• IX-055: 100 µm / IX-080: 200 µm / IX-150: 500 µm / IX-360: 1000 µm) *3

Sampling Cycle:

• Scanning Mode: 120 ms (min.) (typical)
• Line Mode: 6 ms / 11 ms (selectable)

Image Receiver Element

Sensor Type: Monochromatic CMOS image sensor

Image Capture Illumination:

• Light Source: Red LED
• Illumination Method: Pulsed illumination

Temperature Characteristics

Temperature Coefficient of Error (F.E.): 0.04% of F.E./°C *4

Environmental Resistance

Degree of Protection: IP67

Ambient Light: Incandescent lamp, 5000 lux or less *5

Operating Temperature Range: 0 to +45°C (32 to 113°F) (without freezing) *6

Relative Humidity: 35 to 85% RH (no condensation)

Vibration and Shock Resistance

Vibration Resistance: 10 to 55 Hz; double amplitude 1.5 mm (0.06"); 2 hours in each of the X, Y, and Z directions

Shock Resistance: 500 m/s² *2, 3 times in each of the 3 directions

Material

Main Unit Housing: Zinc die-casting / **Front Cover**: Glass, acrylic (hard coat) / **Operation Indicator Cover**: TPU / **Connector Ring**: PBT / **Connector**: Zinc die-casting

Weight

Approx. 190 g

*Notes:*
• *1 X: direction of the long side of the laser, Y: direction of the short side of the laser
• *2 With a correctly mounted reference distance. When measured with the height tool, minimum measurement point and without position adjustment, in scanning mode. When measured with the height tool, minimum tool window size and without position adjustment, in line mode.
• *3 Measured at the center of the field of view in scanning mode, using the "max." measurement point of a KEYENCE reference object (white diffuser) at the reference distance.
• *4 At the reference distance of the object. The F.E. (scale backgrounds) for each model are as follows: IX-055: ±10 mm (0.39"), IX-080: ±18 mm (0.71"), IX-150: ±50 mm (1.97"), IX-360: ±80 mm (3.15")
• *5 Using the default setting with a laser light source as the target.
• *6 With metal mounting.