Rope Winch Specifications

Rope: Ø8mm

Payload: 500kg

Driving speed: 18m/min

Use: Passenger transport

Connection: 400V 50Hz three-phase current

Supply line: 1m cable with CEE plug

Control: Pendant control

HT Cable length: 3m permanently connected

Safety Features

• Limit switch open + emergency Limit switch open permanently attached
• Mechanical overload cut-off according to DIN EN1808

In accordance with the assembly and operating instructions of the manufacturer Tractel (e.g. tirak -rope walk-through winch § General safety instructions) and for safety reasons it is pointed out that only ropes approved by the manufacturer and for the application may be used. If this advice is not followed, Tractel will not be liable for any damage or consequential damage resulting from failure to comply with the above instructions and their general safety instructions.

Additional Information

• Complete machine is supplied with a CE declaration.
• Supplied with 1m power supply cable.
• Upper limit switch and upper Not End (redundancy according to EN1808:2015) mounted on tirak and hardwired.
• CE logo on nameplate.