Pinza amperimétrica PCE-DC2
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Mini digital amperage pin for AC/DC current and AC voltage
The maximum grip strength / aperture of the tweezer is 18 mm
The maximum grip strength / aperture of the tweezer is 18 mm
This amperimetric clamp has been developed for indirect detection of AC/DC currents and resistance. The amperimetric clamp integrates a flashlight to illuminate the measuring point, and the voltage contactless checking function.
The ampere-tethered clamp's illuminated display ensures good reading even in dark places, such as electric cabinets and wiring ducts.
The ampere-tethered clamp's illuminated display ensures good reading even in dark places, such as electric cabinets and wiring ducts.
- LCD screen with 3 2/3 positions
- Reverse lighting
- AC/DC current measurement and resistance
- Value memory
- Function set to zero A DC
- Contactless voltage test (NCV)
- Lamp for illuminating the measuring point
- Automatic range selection
- Automatically disconnected
- The aperture of the tweezer: 18 mm
- Reverse lighting
- AC/DC current measurement and resistance
- Value memory
- Function set to zero A DC
- Contactless voltage test (NCV)
- Lamp for illuminating the measuring point
- Automatic range selection
- Automatically disconnected
- The aperture of the tweezer: 18 mm
| The following shall be added to the list of the relevant data sources: | ||
| Rate | 0, ... 200,0 A | |
| Resolution adopted by the Council | 0,1 A | |
| Accuracy | ±(2,5% + 8 digits) | |
| Continuous current | ||
| Rate | 0, ... 200,0 A | |
| Resolution adopted by the Council | 0,1 A | |
| Accuracy | ±(2,0 % + 5 digits) | |
| Continuous voltage | ||
| Rate | Other, of a kind used for the manufacture of goods | |
| Resolution adopted by the Council | 0,1 V | |
| Accuracy | ±(1,0 % + 2 digits) | |
| The following shall be added to the list of the following: | ||
| Rate | Other, of a kind used for the manufacture of goods | |
| Resolution adopted by the Council | 0,1 V | |
| Accuracy | ±(1,5% + 8 digits) | |
| The resistance | ||
| Rate | 0 ... 999.9 Ω | |
| Resolution adopted by the Council | 0,1 Ω | |
| Accuracy | ±(1,5% + 8 digits) | |
| Other specifications | ||
| Other, of a kind used for the manufacture of goods | The following is added to the list of the products: | |
| Continuity test | The test shall be carried out in accordance with the following conditions: | |
| Indication of battery status | 'BAT' when low voltage | |
| Overrange | Indication 'OL' | |
| Measurement quota | 10 Hz for the measuring value 40 Hz for the bar graph when measuring continuous current, continuous voltage and resistance | |
| Impedance of entry | 1,0 MΩ in measurement of voltage | |
| Screen | Retro-lit LCD | |
| Response time with peak measurement (PEAK Hold) | Other, of a thickness of < 10 ms | |
| Maximum and minimum response time (MAX / MIN Hold) | Other, of a thickness of < 50 ms | |
| Operating conditions | -10 ... +50 °C (14 ... 122 °F) Height: 3000 m above sea level | |
| Storage conditions | -30 ... +60 °C ( -14 ... 140 °F) Height: maximum 10,000 m above sea level | |
| Relative humidity without condensation | Max. 90 per cent Maximum of 75% Max. 45% | 0 ... 30 °C 30 ... 40 °C 40 ... 50 °C |
| Food | 2 x 1.5 V batteries, of type AAA | |
| Automatically disconnected | After 10 minutes of inactivity | |
| Degree of pollution | 2 | |
| The rules | Other vehicles The following conditions shall apply: | |
| Dimension | Other, of a width of not more than 600 mm | |
| Weight | Other, of a kind used for the manufacture of goods | |
