Medidor de higiene PCE-DOM 20

Medidor de higiene PCE-DOM 20

  • Code / Model:
  • Manufacturer: PCE Instruments
  • Department:
  • Category of products:
  • Sub-category: Instruments and equipment
  • You've seen it before.: 1
Hygiene meter with interchangeable sensors / Automatic temperature compensation / Oxygen saturation and sample temperature / For mobile use
The hygiene meter is a device for measuring and determining the oxygen in liquids and air. With the hygiene meter you can quickly analyze water by determining the oxygen content. The temperature sensor integrated into the hygiene meter allows you to make an automatic temperature compensation. Thanks
Before the first start-up, the hygiene meter sensor is dry. To make a measurement, it is necessary to provide the hygiene meter sensor with the electrolyte included in the shipment. In case the membrane is damaged you can replace it in a few steps

- Range up to 20 mg/l
- For the oxygen analysis
- Temperature compensation up to 50 °C
- Shipment includes electrolyte
- To measure in liquids and air
- Possibility of changing the oxygen sensor


Liquid oxygen  
Rate 0 ... 20 mg/L
Resolution adopted by the Council 0,1 mg/L
Accuracy The following is the list of the products used:
Oxygen in the air
(Reference measure)
 
Rate 0 ... 100%
Resolution adopted by the Council 0,1%
Accuracy ± 0,7%
The temperature  
Rate 0 ... 50 °C
Resolution adopted by the Council The following conditions shall apply:
Accuracy The following conditions shall apply:
   
Length of cable 4 m
Heat and air The following is the list of the following:
Screen LCD 29 x 28 mm
The following table shows the calculation of the total amount of the exposure: Automated
Memory Min, Max
Automatically disconnected After about 15 minutes
Operating conditions 0 ... 50 °C, < 80% H.r.
Food 4 x 1.5 V batteries, of type AAA
Absorbed power Approximately 6,2 mA
Dimension Other, of a thickness of not more than 10 mm
Weight Approximately 390 g


Products Related