Repacor, SW-1000 (AB), Traffic Yellow, 380g Cartridge with Mixing Nozzle
- Code / Model: WS3602767 Repacor SW-1000 (AB), RAL 1023 amarillo tráfico, cartucho de 380 g incl. boquilla mezcladora Sherwin-Williams Coatings Deutschland
- Manufacturer: Sherwin-Williams Coatings Deutschland
- Department: Adhesives, sealants and tapes
- Category of products: Seals and resins
- Sub-category: Rellene masses and compounds
- You've seen it before.: 1
Description
Repacor SW-1000 (formerly SikaCor SW 1000 RepaCor, SikaCor SW-1000 RepaCor) is an innovative 2-component abrasion-resistant coating / filler for the maintenance or repair of mechanically damaged coating areas. Protective coating with mechanical and UV resistance in an easy-to-use cartridge.
Features
- Solvent-free, 100% solids, no CMR
- Simple packaging for complex repairs
- Single-coat application
- Early water resistance and underwater drying
- Surface tolerant: can be used on many substrates such as hand-prepared steel, stainless steel, galvanization or aluminum, even on unusual coatings (except for siloxane-based coatings)
- 500 μm anticorrosive protection, similar to the original factory coating
- Diffusion resistant
- Plate-type glass flakes increase coating strength
- Impact and abrasion resistant
- Very high color retention
- Can be coated with 2-component PU finish coats if necessary
Recommended Use
It can be used as a protective anticorrosive filler in land and marine installations (wind turbines), hydraulic engineering (lock gates, steel sheet piles, etc.) or other elevated steel structures where a simple, high-performance and durable repair coating is required.
Product Technical Data
Solids Content
Volume: 100 ± 2 % (ISO 3233-3)
Weight: 100 ± 2 %
VOC
0 g/l determined practically according to the Directive for Protective Coatings of the German Paint Industry Association (VdL-RL 04).
0 g/l calculated from the formulation to comply with the CE Solvent Emissions Directive.
0 g/kg calculated from the formulation to comply with the CE Solvent Emissions Directive (United Kingdom).
Colors
RAL 1023 (color tone approved in accordance with WSA-TR05), RAL 7035.
Slight color variations may occur due to the characteristics of the raw materials.
Flash Point
Base: > 200 °C, Hardener: > 200 °C
Cleaner/Thinner
Thinner P (for cleaning). Clean tools and equipment thoroughly immediately after use. Do not dilute Repacor SW-1000.
Packaging Size
Two-component material supplied in a cartridge: Cartridge with 380 g, 12 cartridges per box, 60 boxes per pallet.
Mixing Ratio
2 parts base to 1 part hardener by volume. Self-mixing thanks to the 2-part cartridges with static mixer.
Density
1.5 kg/l (may vary depending on colors).
Shelf Life
2 years from the date of manufacture, stored in original sealed cartridges in a cool and dry environment.
Recommended Application Methods
Putty, brush
