Viscosímetro de copa Ford PCE-125/5
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Ford glass viscosometer / International standards: ASTM D1200, D333 and D365 / Anodized aluminium machined with interchangeable stainless steel nozzle
The Ford glass viscosometer is used to quickly and easily determine viscosity in liquids. Please note that it is only applicable to low viscosity liquids. Dense pastes and other highly viscosity substances are not suitable for measuring them with a viscosity glass. The structure of
The measurement is performed as follows: First the mouthpiece is kept closed and the cup is filled with the substance to be measured. Remember that it is necessary to fill the cup upwards. A floodgates channel prevents the measurement from being falsified by liquid that can le
When using a glass viscosimeter, keep in mind that depending on the medium used, you must thoroughly clean the glass. Otherwise, there may be residues in the glass that could falsify future measurements.
The measurement is performed as follows: First the mouthpiece is kept closed and the cup is filled with the substance to be measured. Remember that it is necessary to fill the cup upwards. A floodgates channel prevents the measurement from being falsified by liquid that can le
When using a glass viscosimeter, keep in mind that depending on the medium used, you must thoroughly clean the glass. Otherwise, there may be residues in the glass that could falsify future measurements.
- Aluminium anodised - satinated
- Includes factory certificate
- Waterway for clean operation
- Comply with international regulations
- Optional tripod
- Includes factory certificate
- Waterway for clean operation
- Comply with international regulations
- Optional tripod
|
Height of vertical interior |
The following is the list of the samples: |
|
Ø inside the mouthpiece |
5,2 mm |
|
Ø outside the mouthpiece |
The following is the list of the samples taken: |
|
The measurement range (mm2/s) |
215 ... 1413 |
|
Flow time (seconds) ±0,2 |
20 ... 105 |
|
Other materials |
Copper: Aluminium anodized |
|
The Commission shall adopt a decision on the |
The following information is provided by the manufacturer: |
|
Dimension |
Ø interior: 50 mm |
|
Weight |
Approximately 320 g |
