Medidor de dureza PCE-DDD 10
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Digital hardness gauge for measuring hard rubber hardness, thermoplastic (in general), with USB interface and software
The PCE-DDD 10 (Shore D) hardness gauge for thermoplastics is used both as a handheld device for measuring on-site and for checking material in a laboratory. The hardness gauge has a measuring component with sensor and a digital display with
- comply with the current regulations for testing
You 're tough .
- Transfer of data to a PC or laptop
You 're tough .
- Transfer of data to a PC or laptop
- Suitable for individual measurements and in
series
- Measurement on site or in a laboratory
series
- Measurement on site or in a laboratory
| Technical specifications | |
| Measurement range | 0 ... 100 |
| Accuracy measurement | ± 1 degree of hardness |
| Resolution adopted by the Council | 0,1 degree of hardness |
| Type of measurement | Load of spring |
| The diameter of the indentator | The following is the list of the samples taken: |
| The diameter of the end of the indentator | 0,1 ± 0,01 mm |
| Angle of conicity | The following shall be added: |
| Memory capacity | 500 measurements |
| Units | Degree of hardness |
| Range of ambient temperature | 0 ... +50 °C |
| Environmental humidity range | 20 ... 85% |
| Size | 153 x 50 x 29 mm (main part of instrument) |
| Weight | Other, of a kind used for the manufacture of goods |
| Food | The manufacturer shall ensure that the vehicle is equipped with a high-speed automatic transmission. |
| Maximum operating time | 20 h approx. with a battery charge |
| Loading time | Three hours or so. |
| Compliance with the rules | The following information is provided by the manufacturer: |
