Indicador de panel PCE-DPD-F
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Panel indicator for mV/V charge cells / Modular design architecture /
6 digit LED display / Power 230 V or 24 V
6 digit LED display / Power 230 V or 24 V
The digital indicator for charge cells is used to display on screen the detected force and weight of the charge cells. You simply need to adjust the correct sensitivity in mV/V and the digital indicator for charge cells will tell you the correct force or weight. The digital indicator for charge cells
The digital indicator allows the connected charging cells to be powered with voltage. The power voltage can be selected between 5 V and 10 V. Depending on the voltage selection, you can connect 4 or 8 charging cells to the digital indicator.
The digital indicator allows the connected charging cells to be powered with voltage. The power voltage can be selected between 5 V and 10 V. Depending on the voltage selection, you can connect 4 or 8 charging cells to the digital indicator.
- Digital indicator for load cells
- Inlet mV/V
- 3 different measuring speeds
- Different modules are available
- DIN panel dimensions 1/8
- LED screen
- Inlet mV/V
- 3 different measuring speeds
- Different modules are available
- DIN panel dimensions 1/8
- LED screen
| Signal ranges | Precision at 25 °C | Sensitivity in V to 5 V | Sensitivity in The following conditions shall apply: |
| 0 ... 100 mV DC | ± 0,05 % FS | The following conditions shall apply: | The following conditions shall apply: |
| 0 ... 30 mV DC | ± 0,05 % FS | The following conditions shall apply: | The following conditions shall apply: |
| 0 ... 20 mV DC | ± 0,05 % FS | The following conditions shall apply: | The following conditions shall apply: |
| 0 ... 15 mV DC | ± 0,05 % FS | The following conditions shall apply: | The following conditions shall apply: |
| 0 ... 10 mV DC | ± 0,05 % FS | The following conditions shall apply: | The following conditions shall apply: |
| 0 ... 5 mV DC | ± 0,05 % FS | The following conditions shall apply: | The following conditions shall apply: |
| Maximum voltage at the entrance | 30 V (in all ranges) | ||
| Tensions of excitement | 5 V or 10 V (configurable) | ||
| Maximum current | Other | ||
| Number of cells (for cells of 350 Ω but not more than 140 mA) | 1 to 8 charge cells: at 5 V 1 to 4 charge cells: at 10 V | ||
| Screen | 6 digit and 7 segment LED | ||
| Units | The following table shows the results of the calculation of the weight of the product: | ||
| Color | Red | ||
| Height digit | Other, of a width of not more than 15 mm | ||
| Indication range | -99999 ... 999999 | ||
| The decimal point | Other, not further worked than cutting | ||
| Overrange and underrange | Indication in the interim | ||
| Acquisitions per second (adjustable) / Answer to the ladder | 16 Hz / 63 ms 50 Hz / 20 ms 60 Hz / 17ms | ||
| Refresh the displayed indication | 16 Hz | ||
| Electrical connections | Screw plug-in bore, 1 ... 2,5 mm2 | ||
| Food | The following conditions shall apply: The following conditions shall apply: | ||
| Consumption | Maximum of 1 W (indicator only) Maximum 4 W (indicator with options) | ||
| Protection | Frontal: IP65 | ||
| Assembly | Panel | ||
| Cutting of the panel | 92 x 44 mm | ||
| Dimension | 96 x 48 x 91 mm | ||
| Weight | Approximately 150 g | ||
| Operating temperature | 0 ... 50 °C | ||
| Storage temperature | -20 ... 70 °C | ||
| Warming time | About 15 minutes | ||
