Specifications

Model

PR-FB30P3

Type

Reflective (Background suppression)

Output

PNP

Shape

Flat

Cable connection

3 m cable

Detection distance

1 to 30 mm 0.039" to 1.181"

Number of control outputs

2 outputs

Output operation

• Output 1 Light-ON
• Output 2 Dark-ON

Response time

• Output 1 0.5 ms
• Output 2 ON→OFF: 2.7 ms, OFF→ON: 0.5 ms

Sensitivity adjustment

None

Spot diameter

Approx. ø5 mm (at 30 mm)

Light source

4 element, point light source, red LED (650 nm)

Mutual interference prevention function

4 sensors

Indicator lamp

Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)

Control output

30 VDC or lower, 50 mA or lower

Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower

Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.

Protection circuit

Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection

Rating

Power voltage 10 to 30 VDC, including Ripple (P-P) 10 %

Current consumption 19 mA

Environmental resistance

Enclosure rating IP67 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)

Insulation resistance 20 MΩ or higher (500 VDC)

Ambient light Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower

Ambient temperature -25 to +55 °C -13 to 131 °F (No freezing)

Storage temperature -25 to +75 °C -13 to 167 °F

Relative humidity 35 to 85 % RH (No condensation)

Withstand voltage 1,000 VAC, 50/60 Hz, 1 min

Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance 1,000 m/s2, 6 times in each of the X, Y, and Z directions

Material

Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin