Durómetro PCE-DX-AS-ICA incl. certificado calibración ISO
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Mechanical durometer for measuring the hardness of soft elastomers / with a towing needle for better peak reading
The Shore durometer is a single piece with a measuring head and a 360o anti-glare clock. The durometer can be calibrated at any time, and an ISO certificate is attached.
For better peak reading, the meter also has a drag needle, which remains stationary at the maximum measurement point. After its reading it can be set to zero.
For better peak reading, the meter also has a drag needle, which remains stationary at the maximum measurement point. After its reading it can be set to zero.
- With a towing needle
- Reading of the different hardness units
- 360 clock or
- High precision
- Includes a small briefcase.
- ISO calibration certificate included
- Reading of the different hardness units
- 360 clock or
- High precision
- Includes a small briefcase.
- ISO calibration certificate included
|
Pressure strength |
0, ... 12,5 N |
|
Penetration body |
35 o (according to Shore A) |
|
Clock diameter |
Other, not further worked than hot-rolled |
|
Total length |
Other, of a width of not more than 10 mm |
|
Indication range |
0 ... 100 |
|
Measurement range |
10 ... 90 (outside this range the accuracy decreases) |
|
Limit of error |
±2 |
|
Division of the scale |
1 |
|
Tracking needle |
Yes, I did. |
|
The rules |
The following information is provided by the manufacturer: |
|
Weight |
Other, of a kind used for the manufacture of goods |
