Schneider GV3L65 DISYUNTOR MAGNENITO
- Code / Model:
- Manufacturer: Schneider Electric
- Department:
- Category of products:
- Sub-category: Contactors and disconnectors
- You've seen it before.: 1
| Gamma | Other products |
|---|---|
| Name of the product | Other technical provisions The following information is provided: |
| Type of product or component | Motor circuit protector |
| Short name of the device | GV3L |
| Application of the device | Protection of the engine |
| firing unit technology | Magnetic |
| Number of poles | 3P |
|---|---|
| Type of network | Air conditioning |
| Category of employment | Category A according to EN> 50 A |
| Network frequency | 50/60 Hz |
| method of fixing | 35 mm symmetrical DIN rail, state 1 clipped Panel, state 1 screwed - cable type: with 3 x screws M4) |
| engine power in kW | 55 kW at 690 V AC 50/60 Hz 30 kW at 400/415 V AC 50/60 Hz 37 kW at 500 V AC 50/60 Hz |
| Cutting capacity | 100 kA Icu at 230/240 V AC 50/60 Hz 50 kA Icu at 440 V AC 50/60 Hz 12 kA Icu at 500 V AC 50/60 Hz 6 kA Icu at 690 V AC 50/60 Hz 50 kA Icu at 400/415 V AC 50/60 Hz |
| [Ics] short-circuit rated service cutting power | 100 % at 230/240 V AC 50/60 Hz 100 % at 400/415 V AC 50/60 Hz 100 % at 440 V AC 50/60 Hz 50 % at 500 V AC 50/60 Hz 50 % at 690 V AC 50/60 Hz |
| Type of control | Rotating command |
| [In] Rated current | 65 A |
| Magnetic firing intensity | 910 A |
| [Ue] Nominal employment stress | 690 V AC 50/60 Hz according to En> 50 A |
| The following shall be added to the list of the following: | 690 V AC 50/60 Hz according to En> 50 A |
| [Uimp] Resistance to stress peaks | 6 kV at En> 50 A |
| Sectioning power | Yes, it is in the range of En> 40 A |
| Total power dissipated per pole | 8 W |
| Mechanical durability | 50000 cycles |
| Electrical durability | 50000 cycles for AC-3 at 415 V In |
| Other, of a kind used for the manufacture of goods | 5 N.m. - in screw-driven |
| Other | 55 mm |
| Height | Other, of a thickness of not more than 300 mm |
| The depth | Other, of a thickness of not more than 30 mm |
| Weight of the product | 0,96 kg |
| Color | Other, including: |
| The rules | Icu The following information shall be provided: Manufacture from materials of heading 5404 The Commission shall adopt delegated acts in accordance with Article 21 of Regulation (EU) No 182/2011.' |
|---|---|
| Product certificates | CCC Generator BV The following information is provided by the Commission: DNV-GL Other, not further worked than hot-rolled Manufacture from materials of heading 810 CSA UKCA |
| The IP protection level | The following information is provided: |
| Climate resistance | Accord to IACS E10 |
| Storage room temperature | -40 to 80 degrees |
| Fire resistance | 960 °C according to IEC 60695-2-11 |
| Operating room temperature | - 20... 60 degrees |
| Mechanical resistance | Impact, state 1 15 Gn for 11 ms open contactor Impact, state 1 30 Gn for 11 ms closed connector Vibrations, state 14 G, 5...300 Hz |
| Maximum operating altitude | 3000 m |
| Unit Type of Package 1 | CPE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 16,000 cm |
| Package 1 Width | 6,500 cm |
| Package 1 Length | 14,500 cm |
| Package 1 Weight | Other, not further worked than hot-rolled |
| Unit Type of Package 2 | P06 |
| Number of Units in Package 2 | 120 |
| Package 2 Height | 75,000 cm |
| Package 2 Width | 60,000 cm |
| Package 2 Length | 80,000 cm |
| Package 2 Weight | Other articles of heading 8404 |
