FS-V31P Fiber Amplifier, Cable Type, Master Unit, PNP

Code / Model: FS-V31P
Manufacturer: Keyence
Department: Automation and control of processes
Category of products: Manufacturing equipment
Sub-category: Heat controllers
You've seen it before.: 1

Description of the product

Model

FS-V31P

Type

1 Wired Output

Emission

PNP

Main Unit/Expansion Unit

Unit

Signal Output

1 Output
Monitor Output (1 to 5 V): N/A

External Input

Connector: ―

Light Source

4-Element Red LED (Wavelength: 640 nm)

Response Time

33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)

Output Selection

Activated by Light (LIGHT-ON)/Activated by Darkness (DARK-ON) (Selection by Selector)

Display Indicator

Operating Indicator: Red LED/Dual Digital Monitor: Double 7-Segment Display, Set Value (4-Digit Green LED Indicator) and Target Value (4-Digit Red LED Indicator). Current Value Range: 0 to 64,512; Excess Gain: 0P to 999P, Retention Function: It is possible to view the peak and minimum retention values. Selectable between 5 variations

LED Bar Monitor: Excess Gain Shown (85% to 115% in 7 Steps), Scale Presentation

Detection Mode

Light Intensity (Area Detection Possible, Automatic Sensitivity-Tracking Function Included)

Timer Function

Activation Delay Timer/Deactivation Delay Timer/Single Shot Timer/Timer + Deactivation Delay Timer/Timer + Single Shot Timer
Selectable Timer Duration: 0.1 to 9.999 ms, Maximum Error Relative to Set Value: 10% Max.

Signal Output

Open Collector PNP 24 V, 100 mA Max.*1 (Main Unit Only)/20 mA Max. (When Expansion Unit(s) is/are Connected), Residual Voltage: 1 V Max.

External Input

Input Time: 2 ms (ON)/20 ms (OFF) Min.*2

Expansion Units

Up to 16 expansion units can be connected (a total of 17 units). Note that the type with 2 outputs should be counted as two units.

Number of Interference Prevention Units

Normal Operation: HIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台

Size

30.3 mm (Height) x 9.8 mm (Width) x 71.8 mm (Depth) / 1.19" (Height) x 0.39" (Width) x 2.83" (Depth)

Rated Value

Power Supply Voltage: 12 - 24 VCD ±10%, Ripple (P-P) 10% or Less

Classification

Power Consumption: Normal: 750 mW Max. (Using 24 V, 31 mA Max., Using 12 V, 40 mA Max.)/ Power Saving: 580 mW Max. (Using 24 V, 24 mA Max., Using 12 V, 28 mA Max.)*3