SME-8M-DS-24V-K-2,5-OE Sensor of the nearest

• The following is the list of the symbols:
• Certification of the manufacturer (s)
• CE marking (see declaration of conformity)According to the EU EMF Machinery DirectiveAccording to the EU RoHS Directive
• UKCA marked (see declaration of conformity) according to UK regulations on EMCs according to UK RoHS
• Special characteristicsOil resistant
• Note on materialCompliance with the RoHS Directive
• Principle of measurementMagnetic reed
• The following conditions shall apply:
• Bipolar outlet, with contact
• Function of the switching elementNormally open
• Output current of 500 mA or more
• Maximum output current in fixing kits80 mA
• The following shall be added to the list of the following:
• Maximum switching power DC10 W
• Maximum DC switching power in the attachment kits 2.4 W
• Maximum AC switching power in the attachment kits2.4 VA
• The voltage drop is 1.5 V
• Resistance to short circuits
• Overload resistance Not available
• The following shall be reported:
• The following shall be reported:
• Protection against polarity reversal
• Electrical connection 1, type of connectionCable
• Electrical connection 1, connection technique Extreme open
• Electrical connection 1, number of contacts/wires3
• The output of the connection
• Wire test conditionsResistance to alternating bending: according to the Festo standard Test conditions on demand Traction chain: > 5 million cycles, 75 mm bending radius
• Length of cable2.5 m
• The standard is the "Cable" and the "Cable" is the "Cable" and the "Cable" is the "Cable" and the "Cable" is the "Cable" and the "Cable" are the "Cable" and "Cable" properties
• Material of the insulating cover of the TPE-U(PUR cable
• Type of fixingTurn-in can be inserted into the slot from above
• Weight of the product29.8 g
• Body materialPA High alloy stainless steel
• Indication of switching status of the yellow light emitting diode
• Room temperature for mobile cable length - 5 °C ... 70 °C
• The following information is provided by the manufacturer:
• The following conditions shall apply: