SikaCor EG1 VHS(AB) black, 30KG
Tweet
Follow @ADJDiTec
.
Hvis du ønsker en pris på dette produktet, kan du be om det ved å trykke på knappen nedenfor.
Forespørsel om priser
SikaCor® EG-1 VHS is a 2-component, micaceous iron oxide primer and intermediate coating based on epoxy resin. Low solvent content according to the guideline of the Paint Industry Association for corrosion protection coating materials (VdL-RL04).
APPLICATIONSikaCor® EG-1 VHS is intended for use by professional applicators only. Mechanically resistant primer and intermediate coating for atmospherically loaded surfaces of steel, hot-dip galvanized steel, stainless steel and aluminum. In combination with 2-K top coats, results in a mechanically resistant, water and chemical resistant coating system for long-lasting corrosion protection up to corrosivity category C5 high according to DIN EN ISO 12944-2.
PRODUCT FEATURES/ADVANTAGES
VOC content of < 250 g/l
Can be used directly on hot-dip galvanized steel, stainless steel and aluminum
Wide range of coating thicknesses from 80 - 200 µm per pass
Fast curing even at low temperatures
Very short recoating intervals
Liknende produkter
-
VISE
Detaljer
3M Connector for CFast Card, 7G24 Series, N7G24-A0B2RB-10-0HT
-
VISE
Detaljer
HS BASF THINNER SOLVENT I103-0144
-
VISE
Detaljer
MOTOR PITCH 3XM MOOG CARBON BRUSH
-
VISE
Detaljer
CVM/L B/15
-
VISE
Detaljer
Tornillo M30x190 DIN931 10.9 Geomet 500B
-
VISE
Detaljer
Vacon 20 | MI1 | IP 20 | 1,7 A | 0,25 kW