Medidor de torque PCE-FB 10TS
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Torque meter up to 10 Nm / external torque sensor with crown denture /
The following information is provided by the manufacturer:
The following information is provided by the manufacturer:
The torque meter is used to detect torque moment when pressing and loosening screws. The torque meter can also be used as a control instrument. The torque meter has a torque sensor with a toothed crown and two axes. The torque meter allows working with tools
- Screw torque checker
- Measurement range up to 10 Nm
- Error tolerance: maximum0,5%of the range
- Free adjustment of the measuring rate: maximum 1000 Hz
- Processor: 24 bit
- Crown toothed with drill gate up to Ø 13 mm
- Indication MIN/MAX (PEAK)
- Set the limit value with sound alarm
- Statistical analysis in the team
- Units: Nm / N-cm / kgf-m / gf-m / lbf-in
- Multilingual: DE, EN, ES
- Downloaded analytical software
- USB and RS-232 interface
- Protection against overload: 50% maximum
- Measurement range up to 10 Nm
- Error tolerance: maximum0,5%of the range
- Free adjustment of the measuring rate: maximum 1000 Hz
- Processor: 24 bit
- Crown toothed with drill gate up to Ø 13 mm
- Indication MIN/MAX (PEAK)
- Set the limit value with sound alarm
- Statistical analysis in the team
- Units: Nm / N-cm / kgf-m / gf-m / lbf-in
- Multilingual: DE, EN, ES
- Downloaded analytical software
- USB and RS-232 interface
- Protection against overload: 50% maximum
| Model of the The following information is provided: | The following is the list of the countries of the European Union: The following conditions shall apply: |
| Uncertainty | ±0,5% of the measurement range |
| Units | The following conditions shall apply: |
| Maximum overload | 50% of the measurement range |
| Connection | Crown toothed with drill gate Ø up to 13 mm |
| Measurement quota | Free adjustment up to a maximum of 1000 values/s The following table summarizes the data used for the calculation of the value of the data: |
| Functions | The following table shows the following: Measurement with activated limit values Real-time measurement by software |
| Screen | Graphic LCD display 61 x 34 mm Automatically rotate the screen Background lighting |
| The menu | Multilingual: German / English / Spanish |
| Memory | Internal memory and SD memory card (Internal memory is limited to a series of 6,400 measurements) |
| Registration | Manual: Pushing a button Automatic: free adjustment |
| Interface | USB and RS-232, 9 poles Optional: Switch contact output Min / MAX / OK (see below) + 1 entry |
| Software | Download software for evaluation and control |
| Environmental conditions | -10 ... +40 °C |
| Food | 4 x AA Ni-MH 2700 mAh AA The power output of the device shall be measured in accordance with the following conditions: Adjustment of the automatic disconnection function |
| Operating time of the accumulator | About eight o'clock (Bottom lighting turned off: approximately 45 h.) |
| Dimensions of the meter | Other, of a thickness of not more than 10 mm |
| The torque meter dimensions are as follows: | Ø 50 x 185 mm / 860 g |
| Length of cable to sensor (torque meter) | About two metres |
