AP-22A Sensor de presión digital

Model

AP-22A

Type

LED-type digital pressure sensor (positive-pressure [low-pressure] model)

Rated pressure

0 to 1.00 kgf/cm²/0 to 100kPa/0 to 14.5psi/0 to 1.00bar

Fluid type

Air or non-corrosive gases

Type of pressure

Gage pressure

Display

3-digit 7-segment LED (character height: 8 mm 0.315"), display cycle: 5 times/sec.

Repeatability

±1 % of F.S. or less

Response

5 ms

Temperature characteristics

±3 % of F.S. or less of the detected pressure at 25 °C 77 °F within the temperature range of 0 to +50 °C 32 to 122 °F.

Display resolution

0.01 kgf/cm²/1 kPa/0.1 psi/0.01 bar

I/O

Control output

Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less, 2 outputs

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

45 mA or less

Environmental resistance

Pressure resistance

5 kgf/cm²

Ambient temperature

0 to +50 °C 32 to 122 °F

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

100 m/s² (Approx. 10 G), 3 times in each of the X, Y, and Z directions

Material

Front case: polycarbonate, pressure port: die-cast zinc

Weight

Main unit: Approx. 65 g (excluding the cable; Approx. 105 g including the 2 m cable)