LEUZE 50121911 SLS46CI-70.K28-M12
- Code / Model:
- Manufacturer: Leuze Electronic
- Department:
- Category of products:
- Sub-category: Manufacture in which all the materials used are:
- You've seen it before.: 1
| The guy | The test shall be carried out in accordance with the following conditions: |
| The following is the list of the countries: | 1, IEC 61508, in combination with a monitoring unit with appropriate testing, e.g. MSI-TR1B |
| Other products | The test shall be carried out in accordance with the following conditions: |
| Performance Level (PL) | c, EN ISO 13849-1:2008, in combination with a monitoring unit with appropriate testing, e.g. MSI-TR1B |
| MTTFD Other | The following is the list of the countries of the European Union: |
| PFHD | 3E-10 per hour |
| Duration of use | The following conditions shall apply: |
| Category of the product | 2, EN ISO 13849, in combination with a monitoring unit with appropriate testing, e.g. MSI-TR1B |
Optical data
| Effective scope | 5 ... 70 m |
| Limit of scope | 5 ... 80 m |
| Light source | The following is the list of the categories of products used: |
| Wavelength | 940 nm |
| Form of the emission signal | Pulsed |
| Group of LEDs | 1 |
| The opening angle is at maximum. | - 5 ... 5 ° |
Electrical data
| Protective circuit | Protection against short circuits Protection against reverse polarization |
Power data
| Power supply voltage UB. Other | 24 V, CC, -20 ... 20%, including residual corrosion |
| Residual rolling | 10% of UB. Other |
| Electric current in vacuum | 0 ... 40 mA |
Tickets are
| Number of activation entries | 1 Unit (s) |
Activation entries
| Type of voltage | CC |
| The following shall be added to the list of the following: | high: ≥8V low: ≤ 1,5 V |
| High switching voltage, min. | 8 V |
| The maximum switching voltage is low. | Other, not further worked than cutting |
| Delayed activation/locking | 1 ms |
| The input resistance | The amount of the aid shall be calculated on the basis of the following: |
Activation entry 1
| Active switching state | High |
Temporary response
| Frequency of switching | 250 Hz |
| Response time | The following information is provided: |
| Starting time | 300 ms |
Connection
| Number of connections | 1 Unit (s) |
Connection 1
| Function | Tensile power supply Signal IN |
| Type of connection | Round connector |
| Size of tooth | M12 |
| Other materials | Other articles of plastics |
| Number of poles | 4 poles |
Mechanical data
| Design | Cubic |
| Dimensions (An x Al x L) | Other, of a thickness of not more than 20 mm |
| Other, of a kind used for the manufacture of goods | Other articles of plastics |
| Plastic case | Other, including: |
| Other, of a kind used for the manufacture of goods | Plastic / PMMA |
| Net weight | 50 g |
| Colour of the casing | Red |
| Type of fixing | Stage setting |
| Compatibility of materials | The following information is provided: |
Operation and Indication
| Type of indication | LEDs |
| LED number | 2 units (s) |
Environmental data
| Room temperature in service | -30 ... 60 °C |
| Room temperature in storage | -30 ... 70 °C |
Certifications
| Protection index | The following information is provided: Other, including: |
| Safety class | The following shall be added to the list of the following: |
| Certifications | The Commission shall adopt delegated acts in accordance with Article 21 of this Regulation. The following conditions shall apply: c UL US |
| System of rules in force | The following information is provided by the Commission: |
Classification of the products
| Number of duty | Other articles of apparatus |
| The following information shall be provided: | Other articles of apparatus |
| The following information shall be provided: | Other articles of apparatus |
| The following information shall be provided: | Other articles of apparatus |
| The following information shall be provided: | Other articles of apparatus |
| The following information shall be provided: | Other, not further worked than hot-rolled |
| The following information is provided: | Other, not further worked than hot-rolled |
| The following information shall be provided: | Other, not further worked than hot-rolled |
| The following information is provided: | Other, not further worked than hot-rolled |
