Comprobador de medición VE PCE-EVSE 300
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
VE measuring checker for type 1 and type 2 sockets / PP and CP simulation /
Connection to safety plug / Direct connection of the different connectors
Connection to safety plug / Direct connection of the different connectors
The electrical mobility is increasing every day. An important factor is the charging stations of electric vehicles. For the checking of charging stations, also called as Wallbox, special measuring instruments are required to check functionality, safety device and insulation.
The VE measuring checker has been specially designed for this application and includes a wide variety of functions. All outgoing connections from the charging station have an individual output through sockets. This means that all lines can be leveraged through the VE measuring checker. This allows checking the
A charging cable not only contains the supply lines to charge an electric vehicle, but also two interfaces. The electric vehicle communicates with the charging station via the CP line (Control Pilot) and communicates the current state of the electric vehicle. The PP line (Proximity Plug)
The VE measuring checker is supplied with type 1 and type 2 load plugs, which means that a large number of load stations can be checked with the VE measuring checker. The transport bag allows the load plugs and the VE measuring checker to be transported safely.
The VE measuring checker has been specially designed for this application and includes a wide variety of functions. All outgoing connections from the charging station have an individual output through sockets. This means that all lines can be leveraged through the VE measuring checker. This allows checking the
A charging cable not only contains the supply lines to charge an electric vehicle, but also two interfaces. The electric vehicle communicates with the charging station via the CP line (Control Pilot) and communicates the current state of the electric vehicle. The PP line (Proximity Plug)
The VE measuring checker is supplied with type 1 and type 2 load plugs, which means that a large number of load stations can be checked with the VE measuring checker. The transport bag allows the load plugs and the VE measuring checker to be transported safely.
- CP and PP simulation
- Transport bag included
- Direct connection to the charging stations
- Type 1 and type 2 adapter
- Check of the protective driver
- Schuko plug integrated
- Transport bag included
- Direct connection to the charging stations
- Type 1 and type 2 adapter
- Check of the protective driver
- Schuko plug integrated
| Functions | |
| The vehicle shall be equipped with a safety-belt. | Present, error |
| PP simulation (loading cable coding) | Open, 13 A, 20 A, 32 A, 63 A |
| The following information is provided for in the Annex to Implementing Regulation (EU) 2015/2449. | A, B, C, D, error |
| Exits (for testing purposes only) | |
| Measurement connections | L1, L2, L3, N, PE Max. 250 / 430 V AC, 10 A Connector |
| Schuko connection | Max. 250 V AC, 10 A |
| Fusible connection Schuko | Fuseable F 10 A / 250 V, 5 x 20 mm |
| The output of the CP signal | The following conditions shall apply: |
| Other specifications | |
| The input voltage | The following conditions shall apply: 50 / 60 Hz, maximum 10 A |
| Type 1 socket | AC 3 loading mode, compatible with IEC62196-1 Type 1 or SAE J1772 with vehicle connection (Type 1, 5 pins, 1 phase) |
| Type 2 socket | AC 3 loading mode, compatible with IEC62196-2 Type 1 or SAE J1772 with vehicle connection (Type 2, 7 pins, 3 phases) |
| Measurement category | The following table shows the following: |
| Protection | Other, not further worked than hot-rolled |
| Degree of pollution | 2 |
| Operating conditions | 0 ... 40 °C, 10 ... 85 % H.r. without condensation |
| Storage conditions | -10 ... 50 °C, 10 ... 60 % H.r. without condensation |
| Maximum working altitude | Maximum 2000 m |
| Dimensions (hand equipment only) | Other, of a thickness of not more than 10 mm |
| Weight | Approximately 1 kg |
