SENSOR POSICION SIKO MSK5000-0520

Kategori:. : Sensores de proximidad
Pembuat: Siko
Kode: : MSK5000-0520
.
Nombre no disponible.

Jika ingin mendapatkan penawaran harga untuk produk ini, silakan klik tombol di bawah ini.

MEMINTA HARGA

Mechanical data
Feature Technical data Additional information
Housing

synthetic material ABS black

K design
 

zinc die-cast/aluminum

M design, aluminum front cover
  zinc die-cast

ZM design
Sensor/band reading distance 0.1 … 2 mm O, I reference signals
  0.1 … 1.5 mm R reference signal
Sensor/ring reading distance 0.1 … 2 mm O, I reference signals
  0.1 … 1.5 mm

R reference signal
Cable sheath PUR, suitable for drag-chain use 6, 8-wire ø5-0.4 mm
Peripheral speed
    Peripheral speed Vmax [m/s]
Scaling factor 1250 4.00 3.20 1.60 0.80 0.32 0.20 0.10 0.05 0.03 0.01
250 20.00 16.00 8.00 4.00 1.60 1.00 0.50 0.25 0.13 0.06
125 25.00 25.00 16.00 8.00 3.20 2.00 1.00 0.50 0.25 0.12
50 25.00 25.00 25.00 20.00 8.00 5.00 2.50 1.25 0.63 0.30
25 25.00 25.00 25.00 25.00 16.00 10.00 5.00 2.50 1.25 0.61
12.5 25.00 25.00 25.00 25.00 25.00 20.00 10.00 5.00 2.50 1.21
Pulse interval [μs] 0.20 0.25 0.50 1.00 2.50 4.00 8.00 16.00 32.00 66.00
Counting frequency [kHz] 1250.00 1000.00 500.00 250.00 100.00 62.50 31.25 15.63 7.81 3.79
Electrical data
Feature Technical data Additional information
Operating voltage 6.5 … 30 V DC reverse polarity protected
  4.75 … 6 V DC

without reverse polarity protection
Current consumption <25 mA

at 24 V DC, unloaded
  <75 mA

loaded
Output circuit PP, LD (RS422)  
Output signals A, /A, B, /B, I, /I bzw. R, /R  
Output signal level high >UB - 2.5 V PP
  >2.5 V LD
Output signal level low <0.8 V  
Pulse width of reference signal 1 or 4 increment(s)  
Real-time requirement speed-proportional signal output  
Type of connection

open cable end

  
 

plug connector

7/8-pole
  D-Sub

9-pole
Signal pattern

The logical condition of signals A and B is not defined in reference to the index signal I or the reference signal R. It can deviate from the signal form.

Reference or index signal with 4 increments (360°) signal length is only valid from the 5th counting step onwards. A corresponding delay should be taken into consideration after switching on the operating voltage.

Pulse interval

System data
Feature Technical data Additional information
Resolution 0.001, 0.005, 0.01, 0.025, 0.05, 0.1 mm  
Scaling factor

12.5, 25, 50, 125, 250, 1250

  
System accuracy

± (0.025 + 0.01 x L) mm, L in m

at TU = 20 °C
  ±0.1°

at TU = 20 °C
Repeat accuracy ±10 µm  
Measuring range ∞  
Circumferential speed depending on scaling factor and pulse interval see table
Travel speed depending on resolution and pulse interval see table
Ambient conditions
Feature Technical data Additional information
Ambient temperature -10 … 70 °C  
Storage temperature -30 … 80 °C  
Relative humidity 100 % condensation admissible
EMC EN 61000-6-2

interference resistance / immission
  EN 61000-6-4 emitted interference / emission
Protection category IP67 EN 60529
Shock resistance 500 m/s2, 11 ms

EN 60068-2-27
Vibration resistance 100 m/s2, 5 … 150 Hz EN 60068-2-6
  • SYSTEM COMPONENTS
  •  MSK5000 rotativ
  •  
  •  
  •  MR500
  •  
  •  MBR500

Produk serupa