Instrumento de medición de fuerza Célula de carga serie PCE-C-R13LFC
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
A stainless steel force sensor with an uncertainty of only 0.5%. It has dimensions of Ø 13 mm and a height of 7 mm, the force sensor is very versatile.
| Rated load / F.S. force | 5 / 10 / 20 / 50 / 100 kg Other non-revenue generating capacity !!! Nominal load / force selectable !!! |
| Load limitation / force | 120% |
| The following shall be added: | 150% |
| Rate of the nominal output | The following conditions shall apply: |
| Range of power supply voltage | Other, not further worked than cutting |
| Maximum power supply voltage | 5 V |
| The following shall be added to the list of the following: | ± 2 % F.S. |
| Deviation from linearity | 0,5% F.S. |
| The following table shows the results of the tests: | 0,5% F.S. |
| Repeatability | 0,5% F.S. |
| Load flow (30 min) | 0.1% F.S. |
| The input resistance | The following is the list of the following: |
| The output resistance | The following is the list of the following: |
| Insulation resistance | The following conditions shall apply: |
| Rate of ambient temperature | -10 ... 60 °C |
| The service temperature range | -20 ... 80 °C |
| Temperature coefficient the characteristic value | 0,1% F.S. / 10 °C |
| The temperature coefficient is zero | 0,1% F.S. / 10 °C |
| Sensor cable | Ø 2 x 3 m / (extreme open) |
| Appointment of pine trees | EXC+ = red Ex- = black GIS+ = green GIS- = white GND = yellow |
| Material / Housing | Stainless steel |
| Protection | Other, not further worked than cutting |
| !!! Nominal load / force selectable from the menu below!!! | |
