Medidor de torque PCE-FB 500TW
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Torque-static gauge up to 500 Nm / external torque sensor female square 1/4" / graphics display / PEAK function / maximum 1000 Hz /
USB and RS232 serial interface/ downloadable software
USB and RS232 serial interface/ downloadable software
The static torque meter has a female 1/4 square sensor. The static torque meter consists of a meter and an external sensor connected by cable, which allows it to work comfortably. It can rotate the torque sensors in both directions. The static torque meter allows
- Portable torque gauge
- Measurement range up to 500 Nm
- Error tolerance: maximum0,5%of the range
- Adjustment of the measuring rate up to 1000 Hz
- The PEAK function (MIN / MAX)
- Limit value function / Value comparison
- 1/4" square female sensor
- Statistical and graphic analysis
- A graphics display with automatic turn
- Menu: German, English, Spanish
- Analysis software
- USB and RS-232 standard interface
- Overload protection: 50% of the range maximum
- Power: by battery or network
- Not valid for dynamic torque, other accessories not included are required for impact torque
- Measurement range up to 500 Nm
- Error tolerance: maximum0,5%of the range
- Adjustment of the measuring rate up to 1000 Hz
- The PEAK function (MIN / MAX)
- Limit value function / Value comparison
- 1/4" square female sensor
- Statistical and graphic analysis
- A graphics display with automatic turn
- Menu: German, English, Spanish
- Analysis software
- USB and RS-232 standard interface
- Overload protection: 50% of the range maximum
- Power: by battery or network
- Not valid for dynamic torque, other accessories not included are required for impact torque
| The following is the list of the types of vehicles that are included in the vehicle category: | The following conditions shall apply: |
| Uncertainty | ±0,5% of the measurement range |
| Units | The following information is provided by the Commission: |
| Maximum overload | 50% of the measurement range |
| Measurement quota | Free adjustment up to a maximum of 1000 values/s |
| Functions | The following table shows the following: Measurement with activated limit values Real-time measurement by software |
| Screen | Graphic LCD display 61 x 34 mm Automatically rotate the screen Background lighting |
| The menu | Multilingual: German / English / Spanish |
| Memory | Internal memory and microSD memory card (Internal memory is limited to a series of 6,400 measurements) |
| Registration | Manual: Pushing a button Automatic: free adjustment |
| Interface | USB and RS-232, 9 poles Optional: Switch contact output Min/max/okay (see below) + 1 entry |
| Software | Software for evaluation and control |
| Environmental conditions | -10 ... +40 °C |
| Food | 4 x AA Ni-MH 2700 mAh AA The power output of the device shall be measured in accordance with the following conditions: Adjustment of the automatic disconnection function |
| Operating time of the accumulator | Approximately 20 h (Bottom lighting turned off: approximately 45 h) |
| Dimensions of the measurement | Other, of a thickness of not more than 10 mm |
| Dimensions of the static torque meter | Up to 10 Nm Ø90 (Ø40) / 80 mm / 700 g From 10 Nm 1500 g Ø75 / 90 mm / 1500 g |
| Length of cable to sensor | About two metres |
| In the software of the PCE-FB TW series static torque meter you can download it here. You can read the measurement values or control the static torque meter. The measurement made with the static torque meter shows the left and right limit values. | |
