Medidor de automoción PCE-DC 20
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
AC/DC motor meter with direct frequency measurement in the clamp /
LCD screen / Automatic disconnection / Measurement of current up to 1000 A /
For mobile use / Clamp opening: 40 mm
LCD screen / Automatic disconnection / Measurement of current up to 1000 A /
For mobile use / Clamp opening: 40 mm
The AC/DC motor meter is a multifunctional device for determining current, voltage and many other electrical parameters. The aperture of the clamp is 40 mm, which allows measuring with this AC/DC motor meter on cables and lines with a larger diameter. Thanks to this
Unlike other conventional current clamp, the user can use this car meter to measure frequencies.
Unlike other conventional current clamp, the user can use this car meter to measure frequencies.
- Glue opening: 40 mm
- LCD screen backlit
- Automatically disconnected
- After you start it, it's ready to measure.
- Different measuring functions
- Automatic range selection
- LCD screen backlit
- Automatically disconnected
- After you start it, it's ready to measure.
- Different measuring functions
- Automatic range selection
| The following is the list of the parameters: | Rate | Resolution adopted by the Council | Accuracy |
| DC current | 400 A | 0,1 A | ±3 % + 5 digits |
| 600 A | 1 A | ±3 % + 5 digits | |
| 1000 A | 1 A | ±3 % + 6 digits | |
| Overvoltage protection: 120% of the measurement range for up to 60 seconds | |||
| AC current | 400 A | 0,1 A | ±3 % + 5 digits |
| 600 A | 1 A | ±3 % + 5 digits | |
| 1000 A | 1 A | ±3 % + 6 digits | |
| Frequency range: 50 ... 60 Hz Overvoltage protection: 120% of the measurement range for up to 60 seconds |
|||
| DC voltage | 4 V | 1 mV | ± 0,5% + 5 digits |
| 40 V | 10 mV | ± 0,5% + 5 digits | |
| Other electrical equipment | 0,1 V | ± 0,5% + 5 digits | |
| Other electrical equipment | 1 V | ± 1 % + 5 digits | |
| Other electrical equipment | 1 V | ± 1 % + 5 digits | |
| The input impedance shall be: The following shall be added to the list of the following: |
|||
| Air conditioning | 4 V | 1 mV | ±1,2% + 5 digits |
| 40 V | 10 mV | ±1,2% + 5 digits | |
| Other electrical equipment | 0,1 V | ±1,2% + 5 digits | |
| Other electrical equipment | 1 V | ± 2 % + 5 digits | |
| Other electrical equipment | 1 V | ± 2 % + 5 digits | |
| The input impedance shall be: The following shall be added to the list of the following: Frequency range: 40 ... 400 Hz |
|||
| The resistance | 400 Ω | 0,1 Ω | ± 1 % + 5 digits |
| 4 kΩ | 1 Ω | ± 1 % + 5 digits | |
| Other, of a kind used for the manufacture of goods | 10 Ω | ± 1 % + 5 digits | |
| Other, of a kind used for the manufacture of goods | 0,1 kΩ | ± 1 % + 5 digits | |
| 4 MΩ | 1 kΩ | ± 1 % + 5 digits | |
| 40 MΩ | 10 kΩ | ± 2 % + 5 digits | |
| The following shall be added to the list of the following: | |||
| Frequency (directly) |
40 Hz | 1 Hz | ± 0.1% + 1 digit |
| 400 Hz | 1 Hz | ± 0.1% + 1 digit | |
| 4 kHz | 10 Hz | ± 0.1% + 1 digit | |
| Other power units | 100 Hz | ± 0.1% + 1 digit | |
| 100 kHz | 100 Hz | ± 0.1% + 1 digit | |
| The measurement range is 1 ... 10 V RMS, 40 Hz ... 100 kHz | |||
| Frequency | 40 Hz | 0,01 Hz | ± 0.1% + 1 digit |
| (amperectric pinch) | 400 Hz | 0,1 Hz | ± 0.1% + 1 digit |
| Frequency range: 40 to 400 Hz (>20 A) | |||
| Other measuring functions | |||
| Continuity test | Sound signal < 40 Ω | ||
| Test of diodes | Indicates direct voltage | ||
| Other specifications | |||
| Measurement quota | 2 ... 3 measurements per second | ||
| Screen | Other, of a width of not more than 30 mm | ||
| Selection of range | Automated | ||
| Automatically disconnected | After 30 minutes of inactivity, it can be deactivated | ||
| Maximum aperture of the tweezer | Other, of a width of not more than 30 mm | ||
| Coefficient | 0,1 x accuracy x °C* | ||
| Maximum voltage | The following conditions shall apply: | ||
| Maximum working height | 2000 m above sea level | ||
| Operating conditions | 5 ... 35 °C, < 75% H.r. | ||
| Storage conditions | -10 ... 35 °C, < 75% H.r. | ||
| Food | 3 x 1.5 V AAA batteries | ||
| Dimension | Other, of a thickness of not more than 10 mm | ||
| Weight | Approximately 330 g | ||
| The precisions indicated refer to environmental conditions of 18°C, 28°C, 65°F, 83°F. * Temperature is the result of the difference between the temperature of the operating conditions and the current ambient temperature. When the current ambient temperature is higher than the operating temperature The following conditions shall apply: When the current ambient temperature is below the operating temperature The following conditions shall apply: |
|||
