Instrumento de medición de fuerza Sensor de fuerza serie PCE-C-R20LFC
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
It is a pressure cell like a force transducer with a high measurement range of small dimensions.
| The following shall be reported in the table: | The weight of the product shall be calculated on the basis of the following data: The following is the list of the countries of the European Union: You must select the nominal load! |
| Limit load | 120% |
| The following shall be added: | 150% |
| The nominal constant | The following conditions shall apply: |
| Range of use of the power supply voltage | Other, not further worked than cutting |
| Maximum power supply voltage | 5 V |
| The following shall be added to the list of the following: | ± 2 % F.S. |
| Deviation from linearity | 0,5% F.S. |
| Reversibility of the market | 0,5% F.S. |
| Reproductivity | 0,5% F.S. |
| Load flow (30 min) | 0.1% F.S. |
| The input resistance | The following is the list of the following: |
| The output resistance | The following is the list of the following: |
| Insulation resistance | The following conditions shall apply: |
| Rate of temperature | -10 ... +60 °C |
| The service temperature range | -20 ... +80 °C |
| The nominal value of the heat coefficient | 0,1% F.S. / 10 °C |
| The heat coefficient of the zero signal | 0,1% F.S. / 10 °C |
| Sensor cable | Ø 2 x 3 m / (open points) |
| Signal assigned to each cable | EXC+ = red Ex- = black GIS+ = green GIS- = white GND = yellow |
| Material / Measuring body | Stainless steel |
| Type of protection | The following information is provided: |
Important: Select the nominal load !!! | |
