Automatic electrovalves normally closed with maximum input pressure: 200 mbar, 360 mbar and 6 bar.

The main characteristics

• Use in non-aggressive gases of the three families (dry gases).
• EVO: electrovalves with a brass body and maximum input pressure of 200 mbar.
• Electrical power supplies: electrical valves with an aluminium body and maximum input pressure of 200 and 360 mbar.
• EV-6: electrovalves with an aluminium body and maximum input pressure of 6 bar.
• Installation: the electrovalves must be installed with the arrow in the direction of flow.
• EVOs can be installed in any position without prejudice to their proper functioning.
• The EVP and EV6 can be installed in any position except for overhangs (with the coil down).
• The power supply voltage DN15÷DN25: 12 Vdc, 12 V/50Hz, 24 Vdc, 24 V/50Hz, 230 V/50-60 Hz.
• The power supply voltage DN32÷DN200: 24 Vdc, 24 V/50Hz, 230 V/50-60 Hz.
• The following table shows the results of the tests:
• The following information shall be provided:
• Class A, group