Durómetro PCE-DX-AS
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Mechanical durometer for measuring the hardness of soft elastomers / with a towing needle for better peak reading
The Shore durometer is a single piece with a measuring head and a 360o anti-glare clock. The durometer can be calibrated at any time, and is attached an ISO certificate (additional cost). For better peak reading ability, the meter additionally has a drag
The following link explains the process of measuring hardness. You can also see the classification of the different degrees of hardness by clicking here.
The following link explains the process of measuring hardness. You can also see the classification of the different degrees of hardness by clicking here.
- With a towing needle
- Reading of the different hardness units
- 360 clock or
- High precision
- Includes a small briefcase.
- The ISO calibration certificate may be issued optional
- Reading of the different hardness units
- 360 clock or
- High precision
- Includes a small briefcase.
- The ISO calibration certificate may be issued optional
|
Pressure strength |
0, ... 12,5 N |
|
Penetration body |
35 o (according to Shore A) |
|
Clock diameter |
Other, not further worked than hot-rolled |
|
Total length |
Other, of a width of not more than 10 mm |
|
Indication range |
0 ... 100 |
|
Measurement range |
10 ... 90 (outside this range the accuracy decreases) |
|
Limit of error |
±2 |
|
Division of the scale |
1 |
|
Tracking needle |
Yes, I did. |
|
The rules |
The following information is provided by the manufacturer: |
|
Weight |
Other, of a kind used for the manufacture of goods |
