Viscosímetro de copa PCE-128/3
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
ISO glass viscosity meter for viscosity measurement / according to the international standard DIN 53224 / anodized aluminium glass
The ISO glass viscosimeter is suitable for determining the time of emptying of Newtonian or near-Newtonian liquids, and is commonly used in laboratories and in industrial production. For its handling it is necessary to close the mouthpiece and pour the product to be meas
The flow should be stopped as soon as the flow stops, and the time should be stopped. For a relative value this method is suitable in many areas. To ensure the accuracy of the glass viscosimeter in successive measurements, it must be cleaned after each use.
The flow should be stopped as soon as the flow stops, and the time should be stopped. For a relative value this method is suitable in many areas. To ensure the accuracy of the glass viscosimeter in successive measurements, it must be cleaned after each use.
- Clean and finished high quality which guarantees high precision
- Certificate of calibration from the factory
- With a floodgates
- Meets international standards
- Optional: tripod in V
- Certificate of calibration from the factory
- With a floodgates
- Meets international standards
- Optional: tripod in V
|
The measurement range (cS t) |
7 ... 42 cS t |
|
The time of emptying (seconds) |
25 ... 150 seconds |
|
Ø of the emptying nozzle (mm) |
Other, of a thickness of not more than 10 mm |
|
| |
|
Other materials |
Copper: Aluminium anodized |
|
The Commission shall adopt a decision on the |
The following information is provided by the manufacturer: |
|
Dimension |
Ø interior 50 mm |
|
Weight |
Approximately 310 g |
