KV-NC16ETE Relay Expansion Unit

This document provides specifications for the KV-NC16ETE relay expansion unit.

Model

KV-NC16ETE

Output Expansion Unit

Output Mode

MOSFET (With overcurrent protection function)

External Connection Method

European terminal block

Nominal Load

30 VCD, 0.2 A

Leakage Current in OFF State

100 µA or less

Residual Voltage in ON State

0.6 VCD or less

Resistance in ON State

-

Common Point Mode

16 points/1 common (16 terminals)

Response Time

• OFF to ON: 100 µs or less (with a load of 1 mA or more)
• ON to OFF: 200 µs or less (with a load of 1 mA or more)

Relay Life

-

Relay Replacement

-

Internal Current Consumption

30 mA or less

Weight

Approx. 120 g

Notes

• *1 When an overcurrent is detected, the protection operation (output deactivated) and automatic recovery operation are repeated for all outputs within the shared common (The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 007, or 008 to 015), until the cause of the problem is eliminated.
• *2 MOSFET output (N-channel) for the sink type; and MOSFET output (P-channel) for the source type.
• *3 The nominal load of each common terminal is 3.2 A.
• *4 The COM terminals of KV-NC16ET(P), KV-NC16ET(P)E and KV-NC32ET(P) are internally shorted.
• *5 The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 007, or 008 to 015.