Medidor de gas serie PCE-FGD Gases tóxicos y oxígeno
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Gas meter for toxic gases / Standardised signal output / IP65
The manufacturer shall ensure that the vehicle is equipped with the following:
The manufacturer shall ensure that the vehicle is equipped with the following:
Gas meters are also ideal for detecting gases in decay processes, such as in wells or silos. The danger of carbon monoxide poisoning can be greatly reduced with our gas meter. This can be the case in the beverage industry or in the marketing of fruits and veget
We guarantee a connection of the gas meter to a process system thanks to the integrated standard signal of 4-20 mA or 2-10 V. The necessary power supply of the gas meter between 16 and 19 V DC is already provided for in many facilities and systems.
The IP65-protected housing of gas detectors allows for installation in wet wells to control for example hydrogen sulfide, or the carbon dioxide that is usually found in distribution systems.
We guarantee a connection of the gas meter to a process system thanks to the integrated standard signal of 4-20 mA or 2-10 V. The necessary power supply of the gas meter between 16 and 19 V DC is already provided for in many facilities and systems.
The IP65-protected housing of gas detectors allows for installation in wet wells to control for example hydrogen sulfide, or the carbon dioxide that is usually found in distribution systems.
- Sensors for toxic gases
- IP65 protection
- Output signal 4 ... 20 mA / 2 ... 10 V
- Replaceable sensor
- IP65 protection
- Output signal 4 ... 20 mA / 2 ... 10 V
- Replaceable sensor
| Electrical part | |
| Food | 16 ... 29 V DC, protection against reverse polarization |
| Absorbed power (with 24 V DC) | |
| Toxic gases (excluding CO2) | Approximately 23 mA |
| The following table shows the following: | 4 ... 20 mA or 2 ... 10 V |
| Proportional, protection against overload and short circuit | |
| Load | ≤ 500 Ω with current signal |
| A voltage signal of ≥ 50 kΩ | |
| Excess of lower measurement range | Other, of a kind used for the manufacture of goods or services |
| Excess of upper measurement range | Other, of a kind used for the manufacture of goods or services |
| I fail | 2 mA or 1 V |
| I'm going to say it loud. | > 21,8 mA or 10,9 V |
| Mechanical part | |
| Carcass | Other, of a kind used for the manufacture of goods |
| (optional: stainless steel sensor) | |
| Inflammability | Manufacture from materials of heading 841 |
| Color | |
| Sensor | Other, including: |
| Carcass | The following information shall be provided: |
| Dimension | Other, of a thickness of not more than 0,15 mm |
| Type of protection | Other, not further worked than cutting |
| Assembly | Screw assembly |
| Type of connection of sensor | Folded borne, min. 0,25 mm2; max. 1,3 mm2, |
| 3 poles | |
| Other, of a kind used for the manufacture of goods of heading 8106 | M12, black, plastic |
| Weight | Approximately 180 g |
| Generic specifications of the sensor | |
| Sensor | |
| Toxic gases (excluding CO2) | Other, of a kind used for the manufacture of goods |
| Pressure range | The atmosphere ± 10% |
| Storage time | |
| Cooling gases | 6 months |
| Operating temperature | -20 ... +65 °C |
| Storage conditions | +5 ... +30 °C |
| 10 ... 95% H.r. without condensation | |
