Detector de cables PCE-CLT 10
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
High precision cable detector and immediate results / 2.4" TFT display / Range: up to 3000 m / 20 predefined cable types / Compact construction / Storage capability of 99 additional cable types
The cable length detector is a high-precision multifunctional device with immediate results. With the cable detector you can measure the length of cables already placed or yet to be installed. The cable length detector allows you to measure lengths up to 3 kilometers. This is achieved
To extend the battery life, the device integrates an automatic disconnect that by default turns off after 10 minutes of inactivity. The user can individually adjust the automatic disconnect in 10 minute steps.
To extend the battery life, the device integrates an automatic disconnect that by default turns off after 10 minutes of inactivity. The user can individually adjust the automatic disconnect in 10 minute steps.
- High accuracy up to 3000 m
- Results after a short measurement time
- TFT display in 2,4" colour
- Adjustment of automatic disconnection
- Retro-lit TFT screen
- 20 types of pre-defined cables
- Results after a short measurement time
- TFT display in 2,4" colour
- Adjustment of automatic disconnection
- Retro-lit TFT screen
- 20 types of pre-defined cables
| Range of measurement of cable length | According to the speed of propagation of the cable: 5 ... 3000 m with a reduction factor ≤ 99,9% 5 ... 2400 m with a reduction factor ≤80,0% 5 ... 2000 m with a reduction factor ≤66,0% 5 ... 1500 m with a reduction factor ≤ 50,0% |
| Units | m, ft |
| Resolution adopted by the Council | 0,1 m |
| Principle of measurement | Time domain reflectometry |
| Selection of range | Automatically controlled range |
| Accuracy | ± [2 % of the measurement value ±0,2 m] <100 m ± [2 % of the measurement value ±0,5 m] ≤100 m |
| Impedance selection | Automatic output of the impedance control |
| Reduction factor / Spread rate | Adjustable: 1,0 ... 99,9% |
| Type of cable | 20 standard cables |
| Memory | 99 positions for individual cables |
| Connection | BNC, RJ45 |
| Food | 2 x 1.5 V batteries, type AA |
| Indication of battery status | Yes, I did. |
| Automatically disconnected | Adjustable between 10 and 60 minutes |
| Languages of the menu | English, German |
| Operating temperature | The following conditions shall apply: |
| Storage temperature | -10 ... +50 °C (+14 ... +140 °F) |
| Relative humidity | 0 ... 80% H.R. |
