ABB Adapter 2TLA020054R1600 for use with Vital Controller

Code / Model:
Manufacturer: ABB
Department: Automation and control of processes
Category of products: Controllers, HMI Displays and IoT Gateways
Sub-category: Parts and accessories for controllers and automata
You've seen it before.: 9

Description of the product

Pluto Safety PLC, Base Unit

ABB's Pluto is an "all-in-one" safety PLC concept that simplifies the design of safety systems and achieves the highest level of safety category 4 according to EN 954-1. All Pluto units are masters and can see the inputs, outputs, and global memories of other Plutos.

This allows Pluto to evaluate information from the other Pluto and make decisions regarding its own safety devices. Gateway units are available for various bus systems: Profibus ( ), CanOpen ( ), DeviceNet ( ), and Ethernet ( ).

Pluto Features

Pluto inputs (the smallest unit has 16 I/O) can be configured as inputs or outputs.
Most modules in the Pluto family have dual safety outputs: potential-free or PNP types.
Up to 32 Pluto units can be connected securely in a two-wire bus system and communicate with a higher-level system through a gateway or HMI displays.
Therefore, within a maximum extended system, up to 1472 I/O can be connected.
All input components can be connected in series for greater complexity and optimization.

Programming and Connectivity

Pluto offers simple and easy-to-use programming functions. It is easy to configure and install, with up to 640 I/O. Multiple Plutos can be connected on a bus (using the IDFIX identifier) and then connect to external networks using a gateway. A typical example code is ( ).

Pluto boasts a high level of security. Free software is available for programming via bus. It mounts on a 35 mm DIN rail.

IDFIX

The IDFIX ( ) is an identification circuit that allows identifying multiple Plutos when connecting to a bus system. This module is available to distribute a PLC program within a network of Pluto devices.

Tina adapters like ( ) can be used to connect external safety control equipment.

Note

The IDFIX device ( ) connects between the input terminal identification and 0V (also note that the IDFIX device is not needed when using a single Pluto; however, the absence of an IDFIX must be indicated when programming the Pluto device).