PCE-DDD 10 Hardness Tester
- Code / Model: *at-you-like it or life's blood'** 1. **Modelo:** o el equipo de trabajo en el universo (ganstóloboro) * 2019: El equipo de trabajo en el universo (ganstoucher) * 2019: El equipo de trabajo en el universo (ganstoucher)
- Manufacturer: PCE Instruments
- Department: Test and measurement
- Category of products: Measurement of Materials
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Digital Hardness Tester for Hard Rubber and Thermoplastics
The PCE-DDD 10 (Shore D) hardness tester for thermoplastics is used both as a handheld device for on-site measurements and to check material in a laboratory. The hardness tester has a measurement component with a sensor and a digital display with a reading accuracy of 0.1 hardness units. The PCE-DDD 10 hardness tester features an interface for a PC that makes it possible to transmit data to a PC. With the help of the USB cable and the included software, you can easily document and analyze measurements taken in series.
- Complies with current regulations for hardness tests
- Data transfer to a PC or laptop
- Suitable for individual and series measurements
- On-site or laboratory measurement
Technical Specifications
- Measurement range: 0 ... 100
- Measurement accuracy: ± 1 degree of hardness
- Resolution: 0.1 degree of hardness
- Type of measurement: Spring load
- Diameter of the indentor: 1.25 ± 0.05 mm
- Diameter of the end of the indentor: 0.1 ± 0.01 mm
- Conical angle: 35 ± 0.25°
- Memory capacity: 500 measurements
- Units: Degree of hardness
- Ambient temperature range: 0 ... +50 °C
- Ambient humidity range: 20 ... 85%
- Dimension: 153 x 50 x 29 mm (main instrument part)
- Weight: 170 g
- Power supply: Rechargeable Ni-MH 3.6 V battery
- Maximum operating time: Approx. 20 h with a battery charge
- Charging time: Approx. 3 h
- Compliance with standards: GB/T 531.1, ISO7619-1, ASTM D 2240
