CTEK MXS 10 Charger Description

The CTEK MXS 10 is the professional standard charger for CTEK products. This charger is ideal for high-demand devices. The CTEK MXS 10 can perform diagnostics and indicate whether the battery is capable of receiving and maintaining a charge. It also has a specific reconditioning function that restores batteries that have suffered deep discharges or stratification.

It offers a maintenance charge and an optimized mode for cold winter days and a specific mode for charging heavy AGM batteries (Optima type). The display allows the user to follow the entire charging process.

Features

• 8-stage automatic charger providing 10A for 12V batteries from 20Ah to 200Ah and capable of providing a maintenance charge to 300Ah.
• IP 65 class (resistant to dust and water splashes) and developed to protect vehicle electronic circuits as it does not produce sparks, short circuits, and detects polarity inversion.

Specifications

Warranty: 2 years

Included: Free with clips and crocodile clamps

Voltage: 12V

Nominal AC Voltage: 220-240VAC, 50-60Hz

Charging Voltage: SMALL/NORMAL: 14.4V, COLD/AGM: 14.7V, RECONDITION: 15.8V, POWER SUPPLY: 13.6V

Minimum Battery Voltage: 2.0V

Maximum Current: 5A

Maximum Power (max.): 1.0A RMS (at maximum load)

Residual Current: <1Ah/month

Fluctuation: <4%

Operating Temperature: -20°C to +50°C (output temperature automatically reduced in case of overheating)

Charger Type: 8 charging stages and fully automatic charging cycle.

Battery Types: All 12V lead batteries (open lead, MF, Ca/Ca, AGM and most gel)

Capacity: From 20Ah to 200Ah and up to 300Ah for maintenance charges

Delivered with: Crocodile clamps and Tamiya plug.

Applications

• Motorcycle - Car - Boat - Campervan - Caravan - Heavy Vehicle - Agriculture - TP

This new charger is made up of high-quality components and complies with CE, RAEEs, and RoHS regulations. For all chargers, a voltage difference of 1 volt (V) does not pose a risk to your device and allows for optimized charging. Select a charger with the same power output (Watts - W) as the original charger. However, to shorten the charging time, you can choose a charger with a higher amperage (up to one quarter of the capacity: if your battery is 40Ah, your charger should be a maximum of 10A).