Digital Ammeter for Measuring AC Current, AC Voltage, DC Current, and Frequency (3-in-1) / Maximum Clamp Opening 18 mm

This ammeter has been developed to indirectly detect AC/DC current and frequency. The ammeter integrates a flashlight to illuminate the measurement point, and a non-contact voltage check function. The reduced dimensions of this ammeter allow working in hard-to-reach places. The illuminated screen of the ammeter guarantees a good reading even in dark places, such as electrical cabinets and cable ducts. The non-contact voltage check helps you not only to detect potential hazards, but also it is a useful tool to detect the approximate position of the cable cut.

• 3 2/3 position LCD screen, with backlight, DC current clamp
• Measurement of AC/DC current, AC voltage, and frequency
• Function to memorize values, DCA zeroing, non-contact voltage tester
• Integrated measurement point illumination
• Automatic range selection
• Automatic power off
• Clamp opening: 18 mm
• Incl. ISO calibration certificate

Technical Specifications

AC Current (50/60Hz)

• Range: 200 A
• Resolution: 100 mA
• Accuracy: ±3.0 % + 8 digits

DC Current

• Range: 200 A
• Resolution: 100 mA
• Accuracy: ±2.8 % + 8 digits

AC Voltage Check (Non-Contact)

• 100 VAC to 600 VAC 50 / 60 Hz

Frequency

• Range: 40 ... 50 Hz
• Resolution: 0.01 Hz
• Accuracy: ±1.2 % + 5 digits
• Range: 51 ... 510 Hz
• Resolution: 0.1 Hz
• Accuracy: ±1.2 % + 3 digits
• Range: 0.51 ... 1 kHz
• Resolution: 0.001 kHz
• Accuracy: ±1.2 % + 3 digits

Measurement Point Illumination

• White LEDs

Conductor Diameter

• Max. 18 mm

Screen

• 3 2/3 position LCD screen, with white LEDs, backlight

Power Supply

• 2 x 1.5 V AA batteries

Housing

• PVC

Dimensions

• 155 x 66 x 31 mm

Weight

• 155 g

Standards

• EN61010-1; CAT II / 600V
• EN61010-2-032 ; CAT III / 300V