LEUZE 547958 MSI-TR1B-01
- Code / Model:
- Manufacturer: Leuze Electronic
- Department:
- Category of products:
- Sub-category: Safety railings
- You've seen it before.: 1
| Functions | The following information shall be provided: Periodic functional test The following is the list of the types of equipment used: Signal output error The following information shall be provided: |
| Re-starting | Automated Manual |
Parameters
| The guy | The following information is provided: |
| The following is the list of the countries: | The following table shows the following: |
| Other products | The following information is provided: |
| Performance Level (PL) | The following information is provided: |
| MTTFD Other | 78 years, according to ISO 13849-1 |
| PFHD | 8.8E-08 per hour |
| Duration of use | The following conditions shall apply: |
| Category of the product | The following information is provided: |
Electrical data
| Protective circuit | Protection against short circuits Protection against reverse polarization |
Power data
| Power supply voltage UB. Other | 24 V, CC, -20 ... 20 % |
| Electricity consumption, maximum | 200 mA, without external load |
| Residual rolling | -15 ... 15 percent |
| Protection of hazardous areas | External with a maximum of 3,15 A of semi-retarded action |
Tickets are
| Number of digital entries | 4 units (s) |
Tickets are
| The guy | Digital input |
| High switching voltage, min. | Other, not further worked than hot-rolled |
| The maximum switching voltage is low. | Other, not further worked than cutting |
| Switching voltage, you know. | 23 V |
| Type of voltage | CC |
Digital input 1
| Function | The control input for contact monitoring (EDM) |
Digital entry 2
| Function | Control input, receiver |
Digital entry 3
| Function | The following information shall be provided: |
Digital input 4
| Function | Control input, restart |
Digital input 5
| Function | Manual rearmament control input |
Exits
| The following information shall be provided: | 2 units (s) |
| Number of digital outputs | 3 Units (s) |
Security exits
| The guy | The following information shall be provided: |
| Type of voltage | CC |
| Power charge, maximum. | The following is the list of the following: |
The following information shall be provided:
| The following shall be added: | Relay, contact with NA |
The following information shall be provided:
| The following shall be added: | Relay, contact with NA |
Exits
| The guy | Digital output |
| High switching voltage, min. | Other, not further worked than hot-rolled |
| The maximum switching voltage is low. | Other, not further worked than cutting |
| Switching voltage, you know. | 23 V |
| Type of voltage | CC |
Exit 1
| The following shall be added: | Transistor, PNP |
| Function | The following information shall be provided: |
Exit two
| The following shall be added: | Transistor, PNP |
| Function | Signal output error |
Exit 3
| The following shall be added: | Transistor, PNP |
| Function | The test signal output (emitted) |
Temporary response
| Response time | 20 ms |
| Delayed connection | 2 s |
| Sensor response time to test request | 0, 5 ... 60 ms |
Connection
| Number of connections | 1 Unit (s) |
Connection 1
| Function | Tensile power supply Connection to the equipment |
| Type of connection | Borne |
| Type of boiler | Screw-punching |
| Number of poles | 16 poles |
Cable properties
| Connection sections | 0,2 to 2,5 mm2 |
Mechanical data
| Dimensions (An x Al x L) | Other, of a thickness of not more than 10 mm |
| Other, of a kind used for the manufacture of goods | Other articles of plastics |
| Plastic case | Polyamide PA unreinforced |
| Net weight | 200 g |
| Colour of the casing | Grey |
| Type of fixing | The following is the list of the types of equipment used: |
Operation and Indication
| Type of indication | LEDs |
| LED number | 4 units (s) |
Environmental data
| Room temperature in service | -30 ... 60 °C |
| Room temperature in storage | -40 ... 70 °C |
| Relative air humidity (without condensation) | 0 ... 95 percent |
Certifications
| Protection index | The following information is provided: |
| Safety class | The Commission |
| Certifications | The Commission shall adopt delegated acts in accordance with Article 21 of this Regulation. The Commission shall adopt delegated acts in accordance with Article 21 of this Regulation. |
| US patents | The Commission shall adopt implementing acts in accordance with Article 21 of Regulation (EU) No 1095/2012. |
Classification of the products
| Number of duty | Other articles of apparel |
| The following information shall be provided: | The Commission shall adopt implementing acts. |
| The following information shall be provided: | The Commission shall adopt implementing acts. |
| The following information shall be provided: | The Commission shall adopt implementing acts. |
| The following information shall be provided: | The Commission shall adopt implementing acts. |
| The following information shall be provided: | Other, not further worked than hot-rolled |
| The following information is provided: | Other, not further worked than hot-rolled |
| The following information shall be provided: | Other, not further worked than hot-rolled |
| The following information is provided: | Other, not further worked than hot-rolled |
