BECKHOFF EL6740 | Interbus slave terminal
Tweet
Follow @ADJDiTec
.
Om du vill ha en offert på detta produkten kan du begära det genom att klicka på knappen nedan.
Förfrågning om prisEL6740 | Interbus slave terminal
The Interbus slave terminal facilitates data exchange between EtherCAT and Interbus. For both bus systems the terminal “mirrors” up to 32 word input and 32 word output to the respective other system. The outputs are written to the inputs of the other bus with minimum delay. The terminal can use the Interbus protocol up to a baud rate of 2 Mbits. Due to the connection via EtherCAT, no PCI slots are required in the PC.
| Technical data | EL6740-0010 |
|---|---|
| Technology | Interbus slave terminal |
| Fieldbus | Interbus, max. 400 m between 2 stations at 500 kbit/s |
| Number of fieldbus channels | 1 |
| Data transfer rates | 500 kbits, 2 Mbits (default) |
| Interfaces | 2 x D-sub plug, 9-pin, plug and socket with screening and vibration lock |
| Max. number of bytes fieldbus | 32 word input and 32 word output |
| Hardware diagnosis | status LEDs |
| Distributed clocks | – |
| Type of connection | only remote bus |
| Current consumption power contacts | – |
| Current consumption E-bus | typ. 450 mA |
| Special features | status LEDs |
| Weight | approx. 80 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/see documentation |
| Approvals | CE, UL, Ex |
| System | |
|---|---|
| Interbus | For further Interbus products please see the system overview . |