Hempel's Thinner 08080, transparent, 5 Ltr.
Tweet
Follow @ADJDiTec
.
* Si desea una cotizacion de este producto, puede solicitarlo pulsando el siguiente boton.
SOLICITAR PRECIOS
Description: HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf. Recomended use: 08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.SGRE Number A9B10068044
Productos similares
-
MOSTRAR
DETALLES
CABLE WA382 G80-DFM.50Hz-60Hz-RCC.50Hz-6
-
MOSTRAR
DETALLES
GP076063 HOSE 462-6 MALE STRAIGHT L1088MM
-
MOSTRAR
DETALLES
Allen-Bradley 215.02.12 CAPACITOR
-
MOSTRAR
DETALLES
VENTILADOR 1F 63W 230V 50HZ Fabricante: SCHNEIDER ELECTRIC Modelo: NSYCVF560M230PF
-
MOSTRAR
DETALLES
Allen-Bradley 63481-22EX RES. 300 OHMS,6.5W
-
MOSTRAR
DETALLES
1010384